FS-SET 7100 B, 9 kHz - 1 GHz, Active Nearfield Probe Set

Gallery FS-SET 7100 B, 9 kHz - 1 GHz, Active Nearfield Probe Set

FS-SET 7100 B, 9 kHz - 1 GHz, Active Nearfield Probe Set

Nearfield Probe Set including:

HFSL 7101 B Active Near Field Probe (magnetic), 9 kHz - 30 MHz
HFSH 7102 B Active Near Field Probe (magnetic), 4 MHz - 1000 MHz
EFS 7103 B Active Near Field Probe (electric), 9 kHz - 1000 MHz
and Separator EW 7110 and AC/DC adaptor ACDC 7110 in storing case

PARTNER:

SCHWARZBECK MESS-ELEKTRONIK

MARKETS:

RF ,

TEST STANDARDS:

ANSI C63.4 ,

FS-SET 7100B Data Sheet

HFSH 7102 B Data Sheet

EFS 7103 B Data Sheet

EW 7110 Data Sheet

HFSL 7101 B Data Sheet

SPECIFICATIONS

FS-SET 7100 B Active Nearfield Probe Set

The FS-Set 7100 B comes with the following probes: HFSL 7101 B, HFSH 7102B and EFS 7103 B, as well as a Separator EW 7110 and a power supply ACDC 7110. The foam inside the case will protect the probes and accessories during transport and storage.

HFSL 7101 B: Active Magnetic field probe
HFSH 7102 B: Active Magnetic Field probe
EFS 7103 B: Active Electric field probe

Specifications:	HFSL 7101 B	HFSH 7102 B	EFS 7103 B
Nominal frequency range:	9 kHz - 30 MHz	4 - 1000 MHz	9 kHz - 1000 MHz
Coaxial cable connector:	50 Ω BNC	50 Ω BNC	50 Ω BNC
Antenna Factor for H-field strength:	typ. 10-18 dB/Ωm	-4 dB/ Ωm (30-300 MHz)	NA
Antenna Factor for fict. E-field strength:	typ. 61.5 - 69.5 dB/m	+47.5 dB/m (30-300 MHz)	typ. 25 dB/m
Max. field strength measuring range:	117 dBµA/m 0.7 A/m	120 dBµA/m	140 dBμV/m
Min. fieldstrength measuring range:		5 dBμA/m	40 dBμV/m
Displayed noise level QP:	15 dBµA/m 6 µA/m @ 1 MHz	11 dBμV @ 4 MHz	36 dBμV/m
Displayed noise level AVG:	10 dBµA/m 3.2 µA/m @ 1 MHz	5 dBμV @ 4 MHz	30 dBμV/m
Displayed noise level QP:	8 dBµA/m 2.5 µA/m @ 100 kHz, 200 Hz BW
Displayed noise level AVG:	5 dBµA/m 1.8 µA/m @ 100 kHz, 200 Hz BW
Frequency response:	typ. +/- 4 dB	typ. +/- 6 dB	typ. +/- 4 dB (9 kHz - 500 MHz)
Cable length:	2 m	2 m	2 m
Dimensions body	25 x 25 x 100 mm	25 x 100 mm	25 x 100 mm
Weight:	142 g	ca. 140 g	ca. 140 g
Connector:	BNC	BNC	BNC
DC separator:	EW 7110	EW 7110	EW 7110
AC/DC adapter:	ACDC 7110	ACDC 7110	ACDC 7110

The DC-Separator EW 7110 is used for powering the Probes HFSL 7101, HFSH 7102, and EFS 7103. The DC-Separator and the named Probes are available in a practical case in FS-SET 7100. The power adapter ACDC 7110 is required for operation.

Specifications:
Input:	N (male)
Output:	BNC (female)
Housing material:	Aluminum
Housing Dimensions:	35 x 26 x 81 mm
Weight:	ca. 130 g
AC/DC adapter:	ACDC 7110
Power supply: Current consumption:	10-15V100 mA
Suitable Probes:	HFSL 7101, HFSH 7102, EFS 7103