EMSCOPE-RX2 Real-time results (FFT) Common- and Differential-Mode measurements Speeds up RF filter design and problem solving, From EMZER

EMSCOPE-RX2, 9kHz - 110MHz, 2 channel Receiver

Pair EMSCOPE-RX2 with the external LISN your application requires. This two-channel FFT EMI receiver measures conducted emissions and separates common-mode and differential-mode noise, with 30 MHz base coverage and an available 110 MHz upgrade. A CISPR 14-1 click meter license is optional.

PARTNER:

EMZER TECHNOLOGICAL SOLUTIONS, S.L.

MARKETS:

CATEGORIES:

TEST STANDARDS:

Data Sheet

Article on Filter Design

EMSCOPE Advantages

SPECIFICATIONS

EMZER | CONDUCTED EMISSIONS & EMC DIAGNOSTICS

EMSCOPE-RX2 Two-Channel EMI Receiver

Choose the LISN your application needs.

EMZER EMSCOPE-RX2 dual-channel conducted emissions receiver

RX2 provides two receiver inputs without a built-in LISN.

Flexible conducted-emissions testing with an external LISN

Choose RX2 when the EUT needs a different network from the integrated 16 A single-phase LISN. Select an external LISN for its impedance, frequency coverage, voltage and current rating, then use physical and modal measurements to characterize the noise.

External-network flexibility	Configure a suitable network for high-current, DC or other application-specific tests.
Two receiver channels	Compare measured paths and obtain common/differential-mode information.
Filter diagnosis	Track filter changes with consistent detector and bandwidth settings.
Embedded control	Use the browser interface, optical link and included software for measurements and reports.

Measurement setup

1. Connect the EUT	Use the internal single-phase LISN where fitted and suitable, or a correctly rated external network.
2. Connect the receiver	Connect measurement outputs to the appropriate RF inputs using suitable coaxial cables.
3. Select the measurement	Choose EMI or modal mode, span, detectors, bandwidth, dwell time and the applicable limit line.
4. Compare and document	Review traces, identify dominant noise modes and export results. Add the click meter license for discontinuous disturbance testing.

EMI and modal measurement views

EMZER modal conducted-emissions measurement display

Manufacturer example display. Compare noise modes to inform filter selection; illustrated traces are not performance guarantees.

Technical specifications

Receiver channels / transient limiters	2 / 2
Base frequency range	9 kHz–30 MHz
Upper-frequency upgrade	9 kHz–110 MHz with UPGR-110
Receiver standard	CISPR 16-1-1, as specified by EMZER
EMI detectors	Peak, quasi-peak and average
Measurement modes	Conducted EMI and modal analysis (common mode and differential mode)
Full-spectrum measurement time	Equal to selected dwell time; configurable from 1 s to 15 s
CISPR resolution bandwidths	200 Hz, 9 kHz and 120 kHz
MIL resolution bandwidths	1 kHz and 10 kHz
Integrated circuitry	Preamplifiers and transient/pulse limiters
Control and communication	Embedded web application; optical fiber with fiber/Ethernet converter
Software functions	EMI/modal measurements, waterfall/spectrogram, result comparison, preset settings and report export
Export formats	CSV, PDF and image, as supported by the measurement mode
Optional functions	Click meter; oscilloscope/time-domain analysis; model-specific frequency upgrades
Dimensions (W × H × D)	252 × 195 × 438 mm
Weight	5.5 kg

Watch emissions change over time

EMSCOPE waterfall spectrogram of conducted emissions over time

The included waterfall/spectrogram helps reveal emissions that change during an operating cycle.

Options and configuration

Option	Availability	Purpose
UPGR-110	Optional	Extends upper frequency limit from 30 MHz to 110 MHz.
Click meter license	Optional on all models	CISPR 14-1 click meter for discontinuous disturbance testing.
UPGR-OSC	Optional	Time-domain / oscilloscope mode.
Fiber/USB converter	Optional	Optical-fiber connection to a USB-equipped host.

Components and supporting equipment

Included with selected model	Two-channel receiver; two transient limiters; embedded EMI/modal software; optical-fiber communication and fiber/Ethernet converter.
Required for testing	Browser-equipped control device; suitable EUT supply, grounding, measurement cables and test network. Confirm supplied cable lengths and socket configuration with the quotation.
External LISN	Required for RX2/RX4 power-line testing and RX4LZ2 three-phase testing. Select voltage, current and impedance for the EUT and test method.
Separately licensed options	Click meter and oscilloscope functions; frequency upgrades as specified for the configuration.

Add a CISPR 14-1 click meter

An optional click meter license adds discontinuous disturbance testing. Evaluate line and neutral, view four measurement frequencies, review click statistics and generate PDF reports. Available for all four EMSCOPE models.

Explore the EMSCOPE click meter option

Practical questions

Why choose RX2 instead of EMSCOPE?

Choose RX2 for two receiver channels with an application-specific external LISN. Choose EMSCOPE when a built-in 16 A single-phase LISN suits the EUT.

Is the click meter included?

No. It is an optional license for discontinuous disturbance testing. Normal EMI and modal software is included.

Do I need to install measurement software?

The application is embedded in the instrument and accessed in a browser. A browser-equipped device and suitable optical/network connection are still required.

Is 110 MHz standard?

The model table lists 30 MHz base coverage and UPGR-110 as an available upgrade. Specify the required coverage in the quotation.

Downloads and technical resources

Existing Absolute EMC datasheet
Power-line filter design article
EMSCOPE advantages
Current EMZER family technical sheet

Compare all four EMSCOPE models

Choose channel count and LISN arrangement first. All four models support the optional CISPR 14-1 click meter.

Model	Receiver channels	LISN configuration	Base frequency range	Best fit
EMSCOPE	2	Built-in single-phase, 16 A	9 kHz–30 MHz	Integrated single-phase bench testing.
EMSCOPE-RX2	2	External LISN required	9 kHz–30 MHz	Application-specific external networks.
EMSCOPE-RX4	4	External LISN required	150 kHz–30 MHz*	Three-phase EMI and modal troubleshooting.
EMSCOPE-RX4LZ2	4	Built-in single-phase, 16 A; external network for three-phase	150 kHz–30 MHz*	Single-phase bench work plus external three-phase setups.

Shared capabilities: peak, quasi-peak and average EMI detectors; common/differential-mode analysis; embedded browser software; fiber/Ethernet converter; available 110 MHz upgrade; optional oscilloscope and click meter licenses. Transient limiters: two on EMSCOPE/RX2 and four on RX4/RX4LZ2.

*RX4 frequency selection: EMSCOPE-RX4 and EMSCOPE-RX4LZ2 start at 150 kHz as standard. Add UPGR-09 to extend coverage down to 9 kHz. The separate UPGR-110 option extends the upper limit from 30 MHz to 110 MHz.

OTHER PRODUCTS IN THE SAME CATEGORY: