Products
The optoLAN-100Base-T1
-MAX system can be used for the optical transmission of automotive ethernet signals with NXP© TJA1100© chipset (unshielded twisted pair UTP ethernet). The system can be set up with two identical transceivers or one side automotive ethernet and the other 100BaseT. With this setup, the link can be used as a media converter. The devices are supplied by internal batteries and connected with an optical fiber. The standard connector is a 4 pole Rosenberger HSD.
The Marvell® 88Q2112 solution is a single pair Ethernet physical layer transceiver (PHY) for 100/1000Base-T1 signals. Our optoLAN 100/1000Base-T1 88Q2112 is suitable for EMC tests of devices with this kind of chipset. The standard connector is a 4 pole Rosenberger HSD to minimize the emission of our optical link.
The Marvell® 88Q1010 solution is a single pair Ethernet physical layer transceiver (PHY). Our optoLAN-88Q1010 is suitable for EMC tests of devices with this kind of chipset. The standard connector is a 4 pole Rosenberger HSD to minimize the emission of our optical link.
The oscillatory wave generator IPG 2554 S has been designed for immunity testing of electrical and electronic equipment against repetitive damped oscillatory waves according to IEC 61000-4-18 requirements. It generates a decaying sine waveform with ringing frequency from 100 kHz and 1 MHz. These are considered the slow waves. These waveforms represent disturbances occurring in power, control, and signal cables installed in high voltage and medium voltage stations and in heavy industrial installations.
Low-Frequency Transmit Coil (CAB4-3912)
- Frequency: 9 kHz to 150 kHz
- Main Diameter: 120 mm
- Maximum Current: 15 A
- Number of turns: 20
Low-Frequency Sense Coil (CABLSLF)
- Frequency: 9 kHz to 150 kHz
- Diameter to center of the coil: 40 mm
- Number of turns: 51
- Wire type: 7/41 LITZ
- Winding Type: Electrostatically shielded
The LSProbe 2.0 Variant A Field Probe is a high-speed, high-accuracy, and high-dynamic range electric-field probe.
- Its standard frequency range of 9 kHz – 18 GHz. 1,000 V/m
- Best-in-class compensation of linearity, frequency, and temperature guarantees accurate measurements from less than 1 to at least 1,000 V/m.
- A dynamic range of 100 dB is achieved for many frequencies, enabling Field measurements at more than 10,000 V/m.
- Full compliant system meeting the requirements
- IEC 61000-3-2 Harmoinc Emissions
- IEC 61000-3-3 Flicker Emissons
- USB controlled, Windows 10 compatible software included
- 16 Amp, 120, and 230 Voltages, 50/60Hz
TRILOG Broadband Antenna, Combination antenna, Bicon+Log
- 30 MHz to 7 GHz
- 100 Watts
- Ideal Broadband antenna for Emissions measurements to CISPR 16 and many others
- Modular construction
- Electronically and mechanically (+ life time counter) triggerable load switches
- Artificial Network with temperature control
- Shunt resistors: 10 / 20 / 40 / 120Ω
- Battery current: 50A / 100A
The CAR-PFS-80 is an automotive power fail simulator, which is designed for performing fast voltage dips and drops (micro-interruptions) according to standard requirements, mainly from vehicle manufacturers. The electronic switches in the generator allow switching times below 1 microsecond.
