Standards

EMI Measurements:

• FFT-based dual-channel receiver
• According to CISPR16-1-1
• Peak, Quasi-Peak, and Average Detectors
• Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
• The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)
• Measure 4 lines of 3 phase LISN
• The picture is shown with internal LISN [EMSCOPE RX4 LZ2]

• DC to 500 MHz Bandwidth
• Pulse or CW analog signals
• Up to 1km Tx/Rx distance
• Battery Powered

• DC to 25 MHz Bandwidth
• Pulse or CW analog signals
• Up to 1km Tx/Rx distance
• Battery Powered

Highlights of the CS116 Damped Sinusoid Generator

• MIL-STD 461 CS116 Compliant: Meets stringent military testing standards.
• Flexible Frequency Options: Choose from 6, 9, or 17 test frequencies.
• Comprehensive Accessories: Includes injection probe, attenuator, oscilloscope, and control software.
• Efficient Operation: Single signal output reduces test time and supports automation.
• User-Friendly Control: Easily controlled via RS232 and USB interfaces.
• Robust Design: Durable construction with wide power compatibility (90–264 Vac).
• Upgradable: Add CS115, CS106, CS114 

Optimize your naval and industrial testing with the CS116 Damped Sinusoid Generator—precision and efficiency combined.

• Bidirectional Optical Isolation: 20 m multimode fiber link (62.5/125 µm) for galvanic isolation of Control Pilot, CAN, and auxiliary signals.
• Long Life Battery Power: Internal 8.4 V, 4 Ah NiMH pack delivers up to 10 hours of continuous operation.
• Robust Construction: Anodized aluminum housing with rubber bumpers and grounding lug, rated for CISPR 25 Class 5 environments.
• Versatile Signal Interfaces: BNC connector for Control Pilot plus D SUB 15 female for CAN, temperature sensors, connector lock control, etc.
• Wide Protocol Support: Compatible with CCS, CHAdeMO, and GB/T charging standards for comprehensive EVSE/EV EMC testing.
• Compact & Portable: 140 × 86 × 65 mm enclosure weighing ≈760 g—ideal for on site and laboratory test setups.

PGESD 300K DP - Helicopter 300kV ESD Test System

• High Voltage Capability: Generates electrostatic discharges up to 300 kV with reversible polarity.
• Adjustable Electrode: Height adjustable from 1.5 to 6 meters and tilt up to ±60° for precise targeting.
• Standards Compliance: Meets MIL-STD-331, MIL-STD-464, NATO AECTP-250, AECTP-500, and more.
• Automated Operation: PC-based software for remote control, calibration, and test reporting.
• Enhanced Safety: Fiber optic interface ensures operator safety by isolating the control system from high-voltage equipment.
• Versatile Testing: Supports multiple discharge scenarios, including personnel-borne and helicopter-borne ESD tests.
• Durable Design: Built for demanding military and industrial testing environments.

• The EPS Test Table Lt is a simple, inexpensive solution for your EMI testing. It is made from durable, expanded polystyrene (EPS) material and can be customized to your requirements. Complies with CISPR, ISO, & IEC requirements for having a low permittivity and can be used for additional standards.
• High strength EPS 3lb per ft3
• Low Permittivity >1.04
• Made for moderate 200 lb.
• Options
• vinyl topper with your company logo 
• epoxy coating for the top (can be combined with vinyl)

The CDG 7000 is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields - including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, an RF power amplifier, a 3-channel RF voltmeter, and a directional coupler at a very affordable price.

Benefits of the PG1275F Pulse Generator

• MIL-STD-1275F Compliant: Dedicated design for conducted susceptibility testing on 28 VDC circuits.
• Spike & Surge Testing: Handles spikes up to 250 V / 250 mJ and surges up to 100 V / 1210 J.
• High Current Capability: 16 A continuous or up to 400 A with the optional DM400 decoupling diode module.
• Adjustable Waveforms: Configurable rise times, pulse durations, and voltages for precise test conditions.
• User-Friendly Control: Remote interface via RS232 or USB, with optional control software for automated testing.

Enhance your EMC testing with the 1275F Pulse Generator—precision, compliance, and versatility combined.

" An RF Probe Kit on Steroids"

• Fully integrated with Y.I.C. Technologies EMViewer software and EMProbe
• Normalization and correction when using the EMViewer software
• Flat response within the range of operation
• Slim Design and Protective Coating
• 18GHz Measured Cable included
• Lectures & Explanation Document
• Designed By Prof. Arturo Mediano, University of Zaragoza, Spain