Standards

Products

  • Bidirectional Optical Isolation: 20 m multimode fiber link (62.5/125 µm) for galvanic isolation of Control Pilot, CAN, and auxiliary signals.
  • Long Life Battery Power: Internal 8.4 V, 4 Ah NiMH pack delivers up to 10 hours of continuous operation.
  • Robust Construction: Anodized aluminum housing with rubber bumpers and grounding lug, rated for CISPR 25 Class 5 environments.
  • Versatile Signal Interfaces: BNC connector for Control Pilot plus D SUB 15 female for CAN, temperature sensors, connector lock control, etc.
  • Wide Protocol Support: Compatible with CCS, CHAdeMO, and GB/T charging standards for comprehensive EVSE/EV EMC testing.
  • Compact & Portable: 140 × 86 × 65 mm enclosure weighing ≈760 g—ideal for on site and laboratory test setups.

 

  • DC - 200 kHz bandwidth DC 
  • MHz (small signal -3 dB)
  • Output voltage ±75 Vpk
  • Rise / fall time 100 V/µs
  • USB interface standard, LAN optional
  • Analog control input 0 ... ±10 V for control of voltage and current
  • Monitor outputs for measured voltage and current values (not all models)
  • Modularly extensible via master-slave mode
  • Parallel and Series Connections for two or more units

Benefits of the PG1275F Pulse Generator

  • MIL-STD-1275F Compliant: Dedicated design for conducted susceptibility testing on 28 VDC circuits.
  • Spike & Surge Testing: Handles spikes up to 250 V / 250 mJ and surges up to 100 V / 1210 J.
  • High Current Capability: 16 A continuous or up to 400 A with the optional DM400 decoupling diode module.
  • Adjustable Waveforms: Configurable rise times, pulse durations, and voltages for precise test conditions.
  • User-Friendly Control: Remote interface via RS232 or USB, with optional control software for automated testing.

Enhance your EMC testing with the 1275F Pulse Generator—precision, compliance, and versatility combined.

  • See EMI instantly with real-time 150 kHz–6 GHz emissions mapping
  • Pinpoint noise sources fast using a dense 1,218-probe near-field array
  • No external instruments required — integrated spectrum analyzer built in
  • Validate fixes in seconds, not hours or days
  • Cut compliance risk and testing time with bench-top pre-compliance diagnostics

Axos 5 - Compact

  • Multi Tester with 16AMP CDN
  • EFT/Burst 5kV IEC 61000-4-4
  • Surge, Combination Wave 5kV IEC 61000-4-5
  • Surge Magnetic field IEC 61000-4-9 (MSURGE-A loop antenna required)
  • AC Dips/Drops IEC 61000-4-11 (DIP 116 dips transformer required)
  • DC Dips/Drops IEC 61000-4-29 (2x DC supplies required)

Onyx 30

  • +/- 30kV air and Contact Discharge
  • 150pF/330Ohm Standard, Other networks available
  • >16 hour Battery life, AC mains option
  • Optional Software

  • Full IEC/EN 61000-3-X Compliance – Covers harmonics and flicker testing.
  • High-Power Testing – Supports loads up to 75 A and 50 kVA.
  • Regenerative Power Supply – Efficient energy recovery system.
  • Programmable AC Simulation – Adjustable voltage, frequency, and transients.
  • Precision Power Analyzer – Ensures accurate compliance verification.
  • Automated Software Control – Simplifies testing with real-time monitoring.
  • Versatile Applications – Ideal for appliance, automotive, renewable energy, and aerospace industries.

  • Full Compliance – Meets all ISO 7637-4 test requirements
  • Pulse A Testing – Simulates MOSFET/IGBT switching noise (100 kHz – 10 MHz)
  • Pulse B Testing – Low-frequency sinusoidal disturbances (3 kHz – 300 kHz)
  • High-Power RF Amplifier75W output (100 kHz – 400 MHz) for clean signal generation
  • Burst Generator – Supports configurable burst parameters (1–1000 cycles)
  • Power Meter & Directional Coupler – Accurate transient measurement (100 kHz – 10 MHz)
  • Integrated Transformer – Isolates high-voltage circuits & prevents transient damage
  • Scalable & Modular – Configurable for custom DUT testing needs
  • Turnkey Solution – Includes generator, amplifier, coupler, and switching solutions

For EMC tests according to the standard IEC/ EN 61000-4-16, -19 and IEC/ EN 61543

  • Common Mode & Differential Mode
  • Power module with 5A / 250 W or 16A / 800 W
  • Signal generator with DC, sine, triangle, and square waveforms
  • The external source can be added to the internal signal
  • Windows Application software, USB port

The broadband horn antenna BBHA 9120 D is a linear polarized double ridged horn antenna.

  • (0.8) 1 GHz to 18 GHz
  • N - female

Loading...