Standards

Products

EMC PLA Block Lab kits, 10 x 10 x 5 cm

The original EMC PLA blocks are 3D printed with PLA plastic. They are extremely durable and versatile for the EMC environment. They come in dimensional metric sizes of 10 x 10 x 5 cm. Keep your test setup looking professional with this lightweight and EUT support. The surface is easily wiped clean for continued years of everyday use. Ideal for use in EMC testing for EUT and cable supports. The EMC PLA Blocks are crush resistance and able to withstand heavy weight loads without deforming. 1cm marking on 6 sides and allows for stacking and locking together. They are conveniently sold in kits in tote bins for secure storage. Each block has features for looping rubber bands, zip ties, or velcro straps. these features can be used to lock blocks together or to hold EUT/DUT wiring down to the blocks. 

NTFM 8131 A, ISN for 2 unshielded Unsymetrical lines, Acc CISPR 32

  • T-ISN 150 Ohm asymmetric
  • BNC-jack 50 Ohm unsymmetric
  • 2-wire
  • 400 V, 3 A AC
  • 9 kHz - 30 MHz
  • EN55015-2002, CISPR 32, CISPR 15, CISPR 16-1-2

CAR DCC Coupling Box

  • According to ISO 7637-3:2016
  • Built-in capcitor values, selectable: 0.1uF / 470pF / 470pF / 100pF / 100pF
  • Max Voltage 2000V
  • Fits to all Hilo-Test automotive CAR generators

VHBD 9134-4 + Elements, 20 - 200 MHz, 4kW High-Power Biconical Antenna

  • VHBD 9134-4 antenna holder/balun in combination with required elements:
    • Biconical Elements: BBLA 9136
    • Open-Cone Elements: BBFA 9146, FBAL 9178, BBAE 9179
  • high power antenna holder/balun
  • 50:200 Ohm
  • 20-200 MHz, 4 kW, 7/16-female connector

 

VHBA 9123 + Elements, 20 - 300 MHz, 100 W, Rx Biconical Antenna

  • VHBB 9123 antenna holder/balun in combination with required elements:
    • Biconical Elements: BBA 9106, BBLA 9136, BBAK 9137, BBVK 9138
    • Open-Cone Elements: FBAB 9177, FBAL 9178, BBFA 9146
  • Better antenna factor below 50 MHz, also EMV application 100 W
  • 50:200 Ohm
  • 20-300 MHz(dependent on elements), 100 W, Type N (f) 

 

VHA 9103B + Elements, 20 - 600 MHz, 10W, Rx Biconical Antenna

  • VHA 9103B antenna holder/balun in combination with required elements:
    • Biconical Elements: BBA 9106, BBLA 9136, BBAK 9137, BBVK 9138
    • Open-Cone Elements: FBAB 9177, FBAL 9178, BBFA 9146
  • Especially to measure very high field strength
  • 1:1 Balun
  • 20-600 MHz(dependent on elements), 10 W, Type N (f) 

 

BCOI 9180, Booster Coils for High Power Baluns

  • Booster coils for varying the element loading of high power biconical
  • Allows for better matching in low-frequency testing
  • Helps compensate for chamber loading

 

HFBA 9122 + Elements, 0.1 - 500 MHz, 10 W, Rx Biconical Antenna

  • HFBA 9122 antenna holder/balun in combination with required elements:
    • Biconical Elements: BBA 9106, BBLA 9136, BBAK 9137, BBVK 9138
    • Open-Cone Elements: FBAB 9177, FBAL 9178
  • Especially to measure very high field strength
  • 1:1 Balun
  • 0.1-500 MHz(dependent on elements), 10 W, Type N (f) 

 

NNBM DO160-1500, 10 kHz - 400 MHz, 200A, 5µH LISN, DO-160

  • Measurement of interference voltage in vehicles, aircraft, and ships
  • 10 kHz - 400 MHz
  • 1500VDC / 650VAC up to 400Hz
  • Max current 200A, (280A limited time)
  • Impedance of each path: 5 µH || 50 Ω ±20 %

NNBM 8126 A890, 10 kHz - 400 MHz, 75A, 5µH LISN, DO-160

  • Measurement of interference voltage in vehicles, aircraft, and ships
  • (1)10 kHz - 400 MHz
  • 600VDC / 530VAC up to 400 Hz, 270VAC up to 890 Hz
  • Max current 70A, (100A limited time)
  • Impedance of each path: 5 µH || 50 Ω ±20 %


Loading...