VHBA 9123 + Elements, 20 - 300 MHz, 100 W, Rx Biconical Antenna

  • VHBB 9123 antenna holder/balun in combination with required elements:
    • Biconical Elements: BBA 9106, BBLA 9136, BBAK 9137, BBVK 9138
    • Open-Cone Elements: FBAB 9177, FBAL 9178, BBFA 9146
  • Better antenna factor below 50 MHz, also EMV application 100 W
  • 50:200 Ohm
  • 20-300 MHz(dependent on elements), 100 W, Type N (f) 

 

MARKETS:

TEST STANDARDS:

Data Sheet VHBA 9123 w/BBA 9106

Data Sheet VHBA 9123 w/BBAL 9136

Data Sheet VHBA 9123 w/BBAK 9137

Data Sheet VHBA 9123 w/FBAB 9177

Data Sheet VHBA 9123 w/FBAL 9178

SPECIFICATIONS

 

VHBB 9123 + Elements, 20 - 300 MHz, 100 W, Rx Biconical Antenna

    • VHBB 9123 antenna holder/balun in combination with required elements:
      • Biconical Elements: BBA 9106, BBLA 9136, BBAK 9137, BBVK 9138
      • Open-Cone Elements: FBAB 9177, FBAL 9178, BBFA 9146
    • Better antenna factor below 50 MHz, also EMV application 100 W
    • 50:200 Ohm
    • 20-300 MHz(dependent on elements), 100 W, Type N (f) 

 

The antenna holder/balun VHBA 9123 with low loss transmission line transformer are primarily designed for the use with biconical elements such as BBA 9106 or BBAL 9136. It may also be used with rod elements as a dipole with improved bandwidth or collapsible biconical elements like FBAB 9177 or FBAL 9178.

The VHBA 9123 represents a binding link between the high symmetrical antenna holder VHA 9103, VHBB 9124 and the high power antenna holder VHBC 9133 and VHBD 9134. The VHBA 9123 4:1 balun provides an optimized solution for immunity testing and the measurement of shielding effectiveness. Especially at low frequencies, the power requirement is dramatically reduced thanks to the nearly lossless 4:1 balun. Biconical antennas are generally mismatched at low frequencies and show a negative gain.

Typical Application:

  •  Immunity testing up to 100 W
  •  Shielding effectiveness measurements

 

Specifications:  
   10 mm element fixtures.
 Frequency Range, nominal:  20 - 300 MHz
 See elements bellow
Impedance:  50 Ω
 Antenna Factor: 
 (depending on elem. type in use)
 typ. 5-18 dB/m (BBAL 9136)
 Power (EMC TX):  100 W
 Coaxial Connector:  Type N female
 Total weight:  1.1 kg (balun only)
   
 Antenna shaft (Tube):  22 mm
 Length holder:   LH=580 mm
 BBA 9106 Biconical Elements  LE=1.36 m, D=0.52 m, 2.3kg
     Frequency Range    30-300 MHz
 BBAL 9136 Biconical Elements   LE=1.98 m, D=0.57 m, 2.5kg
     Frequency Range    20-200 MHz
 BBAK 9137 Biconical Elements   LE=0.98, D=0.35, 1.8kg
     Frequency Range    45-450 MHz 
 BBVK 9138 Biconical Elements  LE=0.72 m, D=0.26 m, 1.6kg
     Frequency Range    60-600 MHz
 FBAB 9177 Callapible Elements  LE=1.96 m, D=0.9 m
     Frequency Range    25-300 MHz
 FBAL 9178 Callapible Elements  LE=1.9 m, D=0.9 m
     Frequency Range    20-250 MHz

 

 

 Antenna Diagram

 

 

 

 

OTHER PRODUCTS IN THE SAME CATEGORY:
Loading...