Standards

The GTEMCELL GTEM-750/800 is a TEM waveguide with the upper-frequency limit extended to the GHz range. It is under consideration as an alternative measurement facility for both radiated emission and immunity measurements. It is included in the standard IEC 61000-4-20 “Emission and Immunity Testing in Transverse Electromagnetic (TEM) Waveguides”.

Highly accurate reference for antenna calibrations, site validations, and EMC conformance tests according to ANSI C63.4, ANSI C63.5, CISPR 16-1, CISPR/A/244/FDIS Uncertainty in the antenna factors: less than 0.15 dB (95.5%) at the resonance frequency

Highly Accurate Reference Antenna for Site validation measurements according to CISPR 16-1-4 in fully anechoic rooms

STLP 9128 E - Stacked Log Periodic Antenna

• (65)80-1500(3000) MHz
• Type 7/16 female
  Type N female

• 10 kHz - 3 GHz, 30dB Gain, 5dB N.F.
• Compensation long cable loss for EMI Measurement
• Improve system noise floor flatness
• High EMI performance
• High linearity LNA for EMI measurement
• High dynamic range
• Unconditionally Stable
• State-of-the-Art Technology

Special custom generator for high current DOW testing

• High Current Capability: Up to 300 A for direct injection and 75 A with the optional coupling clamp.
• Wide Frequency Range: Operates from 100 kHz to 55 MHz with 10 discrete frequencies (expandable to 10 kHz–100 MHz on request).
• Automation Ready: Fully computer-controlled with RS232 and USB interfaces for calibration, operation, and report generation.
• Efficient Testing: Single output connection eliminates reconnections, significantly reducing test time.

Optimize your naval and industrial testing with the CS116 Damped Sinusoid Generator—precision and efficiency combined.

Special custom generator for high current DOW testing

• High Current Capability: Up to CS116 +7dB for direct injection, 23 A with the optional coupling clamp.
• Wide Frequency Range: Operates from 10, 100 kHz 1, 10, 30, 100 MHz - expandable to 12 frequencies
• Automation Ready: Fully computer-controlled with RS232 and USB interfaces for calibration, operation, and report generation.
• Efficient Testing: Single output connection eliminates reconnections, significantly reducing test time.

Optimize your naval and industrial testing with the CS116 Damped Sinusoid Generator—precision and efficiency combined.

• Tailored to Your Requirements – Custom-designed EMP and PCI solutions for specific voltage, waveform, and test conditions.
• Industry-Leading Fast Pulse Technology – Ensuring precision, repeatability, and compliance with global standards.
• Wide Voltage & Frequency Range – Custom solutions from 5 kV to over 500 kV, optimized for MIL-STD-188-125 and IEC 61000-4-25 testing.
• Seamless Integration & Automation – RS232, USB, and fiber optic control for efficient remote operation.
• Turnkey Testing & Data Acquisition – Compatible with Montena’s PULSELab software, ensuring real-time monitoring and analysis.
• Proven Global Expertise – Montena’s extensive EMP and PCI system portfolio guarantees reliable and compliant solutions for any application.

LSPM 1.0⁺ Triple High-Speed Power Meter, 9 kHz – 6 GHz (12GHz)

• 4.3″ Touchscreen and Ethernet Interface
• Three channel (Single and dual-channel versions are available as well)
• high speed
• high accuracy
• high dynamic range RF Power Meter.

LSPM 2.0⁺ Triple High-Speed Power Meter, 9 kHz – 26.5 GHz (40GHz)

• 4.3″ Touchscreen and Ethernet Interface
• Three channel (Single and dual-channel versions are available as well)
• high speed
• high accuracy
• high dynamic range RF Power Meter.