Standards

• Bidirectional Optical Isolation: 20 m multimode fiber link (62.5/125 µm) for galvanic isolation of Control Pilot, CAN, and auxiliary signals.
• Long Life Battery Power: Internal 8.4 V, 4 Ah NiMH pack delivers up to 10 hours of continuous operation.
• Robust Construction: Anodized aluminum housing with rubber bumpers and grounding lug, rated for CISPR 25 Class 5 environments.
• Versatile Signal Interfaces: BNC connector for Control Pilot plus D SUB 15 female for CAN, temperature sensors, connector lock control, etc.
• Wide Protocol Support: Compatible with CCS, CHAdeMO, and GB/T charging standards for comprehensive EVSE/EV EMC testing.
• Compact & Portable: 140 × 86 × 65 mm enclosure weighing ≈760 g—ideal for on site and laboratory test setups.

• Turnkey EMC test solution — ready to use with full hardware and software integration
• Fast voltage transitions (<5 µs) for full compliance with critical standards
• Covers all major IEC/EN 61000-4-X tests including -11, -13, -14, -27, -28, -34
• User-friendly ACSControl software with built-in test libraries and reporting
• Modular, scalable power platform from 30 kVA up to 2000+ kVA
• Versatile use beyond EMC: ideal for grid simulation, anti-islanding, and inverter testing
• Compact 19" rack-mounted units — easy system integration and footprint optimization
• Certified for global compliance (CE, UKCA, RoHS, EN/IEC EMC and safety standards)

The CDG 7000-E is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields - including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, a 3-channel RF voltmeter, and a directional coupler at a very affordable price. Use an external Amplifier you already have or one that matches your application. 

• The compact device comprises an RF signal generator, a 3-channel RF voltmeter, and a directional coupler.
• Frequency range of the generator/power meter (4 kHz): 9 kHz – 1200 MHz
• The frequency range of the directional coupler: 10 kHz – 1000 MHz, 200 W 
• Depending on ext. amplifier:  IEC/EN 61000-4-6, IEC 60601-1-2 Ed. 4.1,  IEC 61000-4-39, MIL 461 CS 114, ISO 11452-4, ...

" An RF Probe Kit on Steroids"

• Fully integrated with Y.I.C. Technologies EMViewer software and EMProbe
• Normalization and correction when using the EMViewer software
• Flat response within the range of operation
• Slim Design and Protective Coating
• 18GHz Measured Cable included
• Lectures & Explanation Document
• Designed By Prof. Arturo Mediano, University of Zaragoza, Spain

By Frequency Range

The Schwazbeck Biconical elements come in many sizes and offer different performances depending on what your needs are. For best low-frequency performance (good gain, low antenna factor), larger elements work better. The downfall of larger elements is handling or fitting in the test space. Many situations may not need outstanding performance with larger elements. The benefits of these elements and antenna baluns are that they all use the same connections (10mm), allowing for versatile sharing/switching of elements. No need to purchase a new antenna; get new elements.

The CDG 7000 is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields - including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, an RF power amplifier, a 3-channel RF voltmeter, and a directional coupler at a very affordable price.

PGESD 300K DP - Helicopter 300kV ESD Test System

• High Voltage Capability: Generates electrostatic discharges up to 300 kV with reversible polarity.
• Adjustable Electrode: Height adjustable from 1.5 to 6 meters and tilt up to ±60° for precise targeting.
• Standards Compliance: Meets MIL-STD-331, MIL-STD-464, NATO AECTP-250, AECTP-500, and more.
• Automated Operation: PC-based software for remote control, calibration, and test reporting.
• Enhanced Safety: Fiber optic interface ensures operator safety by isolating the control system from high-voltage equipment.
• Versatile Testing: Supports multiple discharge scenarios, including personnel-borne and helicopter-borne ESD tests.
• Durable Design: Built for demanding military and industrial testing environments.

The CDG 7000 is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields - including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, an RF power amplifier, a 3-channel RF voltmeter, and a directional coupler at a very affordable price. IEC 60601-1-2 calling out IEC 61000-4-39 magnetic immunity for close proximity testing requirements can also now be met with the 10 kHz unit. 

Highlights of the CS116 Damped Sinusoid Generator

• MIL-STD 461 CS116 Compliant: Meets stringent military testing standards.
• Flexible Frequency Options: Choose from 6, 9, or 17 test frequencies.
• Comprehensive Accessories: Includes injection probe, attenuator, oscilloscope, and control software.
• Efficient Operation: Single signal output reduces test time and supports automation.
• User-Friendly Control: Easily controlled via RS232 and USB interfaces.
• Robust Design: Durable construction with wide power compatibility (90–264 Vac).
• Upgradable: Add CS115, CS106, CS114 

Optimize your naval and industrial testing with the CS116 Damped Sinusoid Generator—precision and efficiency combined.