Products
The EPS Test Table is a simple, inexpensive solution for your EMI testing. It is made from durable, expanded polystyrene (EPS) material and can be customized to your requirements. Complies with CISPR, ISO, & IEC requirements for having a low permittivity and can be used for additional standards.
- High strength EPS 3lb per ft3
- Low Permittivity >1.04
- Made for high loading 500 lb.
- Options
- vinyl topper with your company logo (shown in picture)
- epoxy coating for the top (can be combined with vinyl)
- Vertikal Active Rod Antenna
- 9 kHz - 30 MHz
- BNC
- reduced noise floor
- with mounting nut for AM 9144 and rechargeable battery
- Meeting requirements of MIL-STD-461, CISPR 25, and others
CABCISPR2532A
- TEST STANDARD: CISPR 25
- 5 μH // 50 Ω LISN / Artificial Network
- Small Size 80 x 80 x 120mm
- Modular construction
- Electronically and mechanically (+ life time counter) triggerable load switches
- Artificial Network with temperature control
- Shunt resistors: 10 / 20 / 40 / 120Ω
- Battery current: 50A / 100A
The Absolute EMC106 series of cables is a very high-performing Coax operating up to 18GHz with incredibly low losses. It can be used for high-power applications resulting in more power reaching your antenna. Also ideal for emissions testing up to 18GHz. allowing for long-distance runs with less loss.
The transient generator CAR-TG 20 is designed according to strict specifications of Ford standards. As per standards FORD FMC1278 and EMC-CS-2009.1 the transient tests defined in RI130, CI220 and CI 260 are generated by CAR-TG20. By that is meant pulse forms: A1, A2-1, A2-2, C-1, C-2, and F.
Therefore, a specified 12VAC Potter & Brumfield relay as well as other parts defined by standard create pulses that are close to real appearing transients.
CABCISPR2515A
- TEST STANDARD: CISPR 25
- 5 μH // 50 Ω LISN / Artificial Network
- Small Size 35 x 80 x 120mm
The Absolute Coax series of cables are designed specifically to meet the requirements for EMC testing. Each industry has requirements that are unique. EMC is no different. Absolute EMC has gone through the selection process to only offer the best performance quality and value. Taking away the need to spend hours searching and looking through specs and manufacturers to find what you hope is the best value. 4 options are available fitting most EMC applications.
Test System for MIL-STD-641 CS114, CS115, CS116
- Automatic calibration for the whole test frequency range
- Application of all test frequencies automatically. The level can be selected or automatic.
- NO need to manually configure the measurement equipment
- NO need to manually integrate the transfer function of probes and attenuators
- Generation of test reports: NO need to record all values read from the measurement equipment
- Generation of calibration reports: NO need to record all calibration setting parameters
- Rack together and add CS101, CS109, and RS101 (sections 18, 19, and 20 of the RTCA DO-160G are also available.)
- Technologically advanced, fast-switching, compact 19-inch power supplies
- High control dynamics in the 100...200 µs range – even at higher power levels
- Exceptional current accuracy of <0.02% FS, additional high-resolution current measurement range included as standard
- Full power regeneration and a high degree of efficiency, resulting in a significant reduction of energy consumption and heat dissipation, low acoustic noise
- Wide current-voltage range with an auto-ranging factor of 3
- Full digital CV, CC, CP, CR, and Ri-Sim control modes
