Products
High-Frequency Transmit Coil (CAB4-3910)
- Frequency: 150 kHz to 26 MHz
- Main Diameter: 100 mm
- Number of Turns: 3
- Wire Diameter: 1mm
- Connection type: ‘N’ type Coaxial
High-Frequency Sense Coil (CABLSHF)
- Frequency: 150 kHz to 26 MHz
- Diameter to center of the coil: 41 mm
- Number of turns: 1
- Wire type: 1mm single core
- Winding Type: Electrostatically shielded
The transient generator CAR-TG 20 is designed according to strict specifications of Ford standards. As per standards FORD FMC1278 and EMC-CS-2009.1 the transient tests defined in RI130, CI220 and CI 260 are generated by CAR-TG20. By that is meant pulse forms: A1, A2-1, A2-2, C-1, C-2, and F.
Therefore, a specified 12VAC Potter & Brumfield relay as well as other parts defined by standard create pulses that are close to real appearing transients.
EMI Camera for Low Emission / High Field Use
- 30x Optical Zoom
- Low light uses 0,05 lux (day) and 0,005 lux (night)
- Integrated microphone
- Battery or wall-powered
- Single Fiber operation (duel direction)
- Local controls on back (zoom/pan/tilt/focus/..)
- Options for Pan/Tilt, Joystick, HIRF, recording, motion triggering, OCR, ...
The EPS Test Table is a simple, inexpensive solution for your EMI testing. It is made from durable, expanded polystyrene (EPS) material and can be customized to your requirements. Complies with CISPR, ISO, & IEC requirements for having a low permittivity and can be used for additional standards.
- High strength EPS 3lb per ft3
- Low Permittivity >1.04
- Made for high loading 500 lb.
- Options
- vinyl topper with your company logo (shown in picture)
- epoxy coating for the top (can be combined with vinyl)
The optoCAN-HS system can be used for the bidirectional optical transmission of CAN signals with transmission rates of up to 1Mbit/s. It consists of two identical battery-supplied transceivers connected to each other with an optical fiber. The optical transmission and the shielded case make the system well equipped for EMI and EME tests. The optoCAN-FD is fully backward-compatible with HS and is highly recommended.
CABCISPR2532A
- TEST STANDARD: CISPR 25
- 5 μH // 50 Ω LISN / Artificial Network
- Small Size 80 x 80 x 120mm
The Absolute Coax series of cables are designed specifically to meet the requirements for EMC testing. Each industry has requirements that are unique. EMC is no different. Absolute EMC has gone through the selection process to only offer the best performance quality and value. Taking away the need to spend hours searching and looking through specs and manufacturers to find what you hope is the best value. 4 options are available fitting most EMC applications.
Test System for MIL-STD-641 CS114, CS115, CS116
- Automatic calibration for the whole test frequency range
- Application of all test frequencies automatically. The level can be selected or automatic.
- NO need to manually configure the measurement equipment
- NO need to manually integrate the transfer function of probes and attenuators
- Generation of test reports: NO need to record all values read from the measurement equipment
- Generation of calibration reports: NO need to record all calibration setting parameters
- Rack together and add CS101, CS109, and RS101 (sections 18, 19, and 20 of the RTCA DO-160G are also available.)
The CAR-PFS-80 is an automotive power fail simulator, which is designed for performing fast voltage dips and drops (micro-interruptions) according to standard requirements, mainly from vehicle manufacturers. The electronic switches in the generator allow switching times below 1 microsecond.
CABCISPR2515A
- TEST STANDARD: CISPR 25
- 5 μH // 50 Ω LISN / Artificial Network
- Small Size 35 x 80 x 120mm
