dAV-Cr-HD camera

The dAV-Cr-HD camera can be used for the optical and acoustical monitoring of devices under test during EMC measurements. It has an integrated mono microphone and can be set via an external set-up LCD and eight buttons on the case or via remote control from the control room. Because of HD-resolution, high-quality DUT surveillance can be done. With the optical transmission and the shielded case, the camera is well equipped for EMI and EME tests.
 

The camera system dAV-Cr-HD (r = remote) is by default equipped with the option for remote control. Therefore, all settings and functions can be controlled via the receiver dAV-Rr (dAV-R with the option -r).

Pan/tilt unit PT-02/03

The camera dAV-Cr can be mounted on the pan/tilt unit and can be controlled via the receiver dAV-Cr. The pan/tilt unit is an option for the camera.  The end stops can be set by buttons at the pan/tilt unit (e.g. if the camera would crash into something when moved).

The optional pan/tilt unit PT-02/03 can be connected to the camera by an integrated ¼“ tripod socket. Due to the small dimensions of the camera and pan/tilt unit the system can be easily used within a vehicle, e.g. in order to monitor the dashboard.

With the help of the "Move" buttons, the pan/tilt unit can be moved to the desired position on site.

• Pan/tilt unit PT-02 specifically designed for the mounting at the walls or the ceiling of an anechoic chamber (see right pan/tilt in the picture)
• Pan/tilt unit PT-03 for mobile use with reinforced brackets (on the left)

Setup of a camera with pan/tilt unit

The camera, which is mounted on the pan/tilt unit PT-03, is supplied by the Battery Pack. With the help of the external display ED-43, the camera can be comfortably set up.

Accessories and options

• Camera control software ccs for the remote control via software, with GUI (com interface necessary). In order to use this software, the camera receiver is connected to a PC via USB (built into all receivers) or ethernet (optional)

• Remote control via software: with Ethernet-GUI (option -ethernet remote)

• On-Screen Display (OSD, display of DUT-data in the video stream, com interface and drivers for your HF software necessary)

  

• 30x zoom for HD-Kameras (e.g. for large EMC chambers)

• Wide-angle and close-up lens

• ST optical connectors

• External remote control dAV-Rrc-Joy and dAV-Rrc-Joy-matrix
  External remote control for dAV-Rrc-Joy and dAV-Rrc-Joy-matrix for all functions of the camera and the multichannel receiver. Up to 8 and 16 cameras can be addressed directly by pushbuttons, the connected pan/tilt units can be controlled with the joystick. Twist the joystick to zoom with the camera (tela/wide), push forward and backward for moving the pan/tilt in the y-axis, turn left or right for the x-axis.
  The dAV-Rrc-Joy is supplied by the remote connector of the receiver, no additional power supply is necessary.

• Option -HiRF
  With the option -HiRF, camera, and pan/tilt unit are fit for very high field strengths and frequencies. The devices are equipped with additional screws and special cables for a high immunity: >> 600V/m up to 40GHz.

• Power supply: External battery pack BP120-5f AND/OR Shielded external power supply SPS120 (see picture on the right) for wall mount setups (230V and 110 V available)