Products
The Absolute EMC106 series of cables is a very high-performing Coax operating up to 18GHz with incredibly low losses. It can be used for high-power applications resulting in more power reaching your antenna. Also ideal for emissions testing up to 18GHz. allowing for long-distance runs with less loss.
The Marvell® 88Q2112 solution is a single pair Ethernet physical layer transceiver (PHY) for 100/1000Base-T1 signals. Our optoLAN 100/1000Base-T1 88Q2112 is suitable for EMC tests of devices with this kind of chipset. The standard connector is a 4 pole Rosenberger HSD to minimize the emission of our optical link.
The CAR-PFS-80 is an automotive power fail simulator, which is designed for performing fast voltage dips and drops (micro-interruptions) according to standard requirements, mainly from vehicle manufacturers. The electronic switches in the generator allow switching times below 1 microsecond.
The Marvell® 88Q1010 solution is a single pair Ethernet physical layer transceiver (PHY). Our optoLAN-88Q1010 is suitable for EMC tests of devices with this kind of chipset. The standard connector is a 4 pole Rosenberger HSD to minimize the emission of our optical link.
The Absolute Coax series of cables are designed specifically to meet the requirements for EMC testing. Each industry has requirements that are unique. EMC is no different. Absolute EMC has gone through the selection process to only offer the best performance quality and value. Taking away the need to spend hours searching and looking through specs and manufacturers to find what you hope is the best value. 4 options are available fitting most EMC applications.
The optoLAN-10GBASE-T1 BCM89890 system is a digital bidirectional optical transmission device for automotive Ethernet LAN-10G/5G/2.5GBASE-T1 signals (switchable).Featuring Rosenberger H-MTD connectors, optical transmission, and a shielded case, it ensures reliable, interference-free performance for EMI and EME testing, proven in automotive EMC labs.
- Vertikal Active Rod Antenna
- 9 kHz - 30 MHz
- BNC
- reduced noise floor
- with mounting nut for AM 9144 and rechargeable battery
- Meeting requirements of MIL-STD-461, CISPR 25, and others
- Full compliant system meeting the requirements
- IEC 61000-3-2 Harmoinc Emissions
- IEC 61000-3-3 Flicker Emissons
- USB controlled, Windows 10 compatible software included
- 16 Amp, 120, and 230 Voltages, 50/60Hz
The Wood Test Table is a simple, inexpensive solution for your EMC testing. The table is built to be ship flattened to reduce shipping costs and easily assembled on site quickly. The picture is shown with a ground plane.
TRILOG Broadband Antenna, Combination antenna, Bicon+Log
- 30 MHz to 7 GHz
- 100 Watts
- Ideal Broadband antenna for Emissions measurements to CISPR 16 and many others
