Products
Helmholtz Coils Overview see below
The optoLAN-100Base-T1
-MAX system can be used for the optical transmission of automotive ethernet signals with NXP© TJA1100© chipset (unshielded twisted pair UTP ethernet). The system can be set up with two identical transceivers or one side automotive ethernet and the other 100BaseT. With this setup, the link can be used as a media converter. The devices are supplied by internal batteries and connected with an optical fiber. The standard connector is a 4 pole Rosenberger HSD.
The Marvell® 88Q2112 solution is a single pair Ethernet physical layer transceiver (PHY) for 100/1000Base-T1 signals. Our optoLAN 100/1000Base-T1 88Q2112 is suitable for EMC tests of devices with this kind of chipset. The standard connector is a 4 pole Rosenberger HSD to minimize the emission of our optical link.
The Marvell® 88Q1010 solution is a single pair Ethernet physical layer transceiver (PHY). Our optoLAN-88Q1010 is suitable for EMC tests of devices with this kind of chipset. The standard connector is a 4 pole Rosenberger HSD to minimize the emission of our optical link.
- Modular construction
- Electronically and mechanically (+ life time counter) triggerable load switches
- Artificial Network with temperature control
- Shunt resistors: 10 / 20 / 40 / 120Ω
- Battery current: 50A / 100A
The optoLAN-10GBASE-T1 BCM89890 system is a digital bidirectional optical transmission device for automotive Ethernet LAN-10G/5G/2.5GBASE-T1 signals (switchable).Featuring Rosenberger H-MTD connectors, optical transmission, and a shielded case, it ensures reliable, interference-free performance for EMI and EME testing, proven in automotive EMC labs.
- Full compliant system meeting the requirements
- IEC 61000-3-2 Harmoinc Emissions
- IEC 61000-3-3 Flicker Emissons
- USB controlled, Windows 10 compatible software included
- 16 Amp, 120, and 230 Voltages, 50/60Hz
TRILOG Broadband Antenna, Combination antenna, Bicon+Log
- 30 MHz to 7 GHz
- 100 Watts
- Ideal Broadband antenna for Emissions measurements to CISPR 16 and many others
The CAR-PFS-80 is an automotive power fail simulator, which is designed for performing fast voltage dips and drops (micro-interruptions) according to standard requirements, mainly from vehicle manufacturers. The electronic switches in the generator allow switching times below 1 microsecond.
The STLP 9129 Special was specially designed for wideband immunity tests. This unrivaled bandwidth was achieved by combining both well-proven antenna designs STLP 9128 D and STLP 9149. The STLP 9129 Special does provide the optimum gain and field uniformity at the same time, as well as both basic antennas, do. Main Application: Generation of defined high field strength levels for radiated immunity testing acc. IEC 61000-4-3.
- 70 MHz to 10 GHz
- gain of 8.6 dBi, ripple of less than +/- 2.3 dB
- Type N female or Type 7/16 female
