Standards

Products

TEMP 8400, 9 kHz - 1 GHz, TEMPEST AMN (LISN)

  • TEMPEST AMN (LISN) Line Impedance Stabilization Network
  • 9 kHz - 1 GHz
  • Impedance (50Hz): 1.4 Ω
  • AMN Impedance A or B: 50 Ω

PVDC 8300, 150 kHz - 30 MHz, 100A, DC-AMN (LISN) Photovoltaic Inverters

  • symmetric DC-LISN Line Impedance Stabilization Network
  • 150 kHz - 3 MHz
  • Current rating: 100 A (150 A 15min)
  • Impedance CM and DM: (150 +/- 20) Ω
  • AMN Impedance A or B: (150 +/- 20) Ω

PVDC 8301, 150 kHz - 30 MHz, 200 A, DC-AMN (LISN) Photovoltaic Inverters

  • symmetric DC-LISN Line Impedance Stabilization Network
  • 150 kHz - 30 MHz
  • Max current 200A, (250A 15min)
  • Impedance CM and DM: (150 +/- 20) Ω
  • AMN Impedance A or B: (150 +/- 20) Ω

ECSS LISN 1, 10 Hz - 150 MHz, 10A, DC Lines, LISN

  • European Cooperation for Space Standardisation -LISN Line Impedance Stabilization Network
  • 10 Hz - 150 MHz
  • Max current 10A, (15A 15min)
  • Impedance of each path: 1.5 μH || 50 Ω

PILOT ISN, 150 kHz - 30 MHz, 1.4A, PLC

  • PLC Power Line Communications, ISN Impedance Stabilization Network
  • 150 kHz - 30 MHz
  • Max current 1.4A, 
  • Impedance of each path: 150 Ω

NNBL 8240, 9 kHz - 100 MHz, 800A, 50µH Single Path LISN

  • Measurement of interference for MIL-STD-461/462
  • 9 kHz - 100 MHz
  • 1000VDC / 650VAC 50/60Hz
  • Max current 800A, (1000A limited time)
  • Impedance of each path: 50 µH +5 Ω || 50 Ω ±20 %

CS-50, 2 way splitter, 50 Ohms acc. EN 50561-1

  • A resistive, unsymmetrical two-way splitter
  • The impedance of 50 Ω
  • Acc. to EN 50561-1:2012 which is explained in chapter 9.2.
  • Figure 4 shows the measurement setup with the available components

SPLIT 100, 2 way splitter, 100 Ohms acc. EN 50561-1

  • A resistive, unsymmetrical two-way splitter
  • The impedance of 100 Ω
  • Acc. to EN 50561-1:2012 which is explained in chapter 9.2.
  • Figure 4 shows the measurement setup with the available components

SY 9223-50561-1, Symmetrical Transformer, 50 to 100 Ohms acc. EN 50561-1

  • Symmetrical transformer
  • Transforms an unsymmetrical 50 Ω signal into a symmetrical signal with an impedance of 100 Ω
  • Attenuates the power by 8 dB
  • Acc. to EN 50561-1:2012, chapter 9.2. Figure 4 shows the setup, figure 5 shows the principle diagram

CU 50561-1, Coupling Unit , acc. EN 50561-1

  • The coupling unit for measurements at powerline transmission devices.
  • Acc. standard EN-50561-1
  • Combined with two-line impedance stabilization networks (LISN) 


Loading...