PILOT ISN, 150 kHz - 30 MHz, 1.4A, PLC
- PLC Power Line Communications, ISN Impedance Stabilization Network
- 150 kHz - 30 MHz
- Max current 1.4A,
- Impedance of each path: 150 Ω
Data Sheet
SPECIFICATIONS
PILOT ISN, 150 kHz - 30 MHz, 1.4A, PLC (Power Line Communication)Pilot ISN is an impedance stabilization network which can be used to measure disturbance voltages of PLC (power line communication). Its design is based on IEC 61851-21-1. The ISN provides decoupling from the equipment under test (EuT) and the communication device or load (AE). The Pilot ISN has an impedance of 150 Ω according to the standard as long as a PLC connection with an impedance of 100 Ω is established. The integrated attenuator improves the impedance matching and has to be switched on
|
OTHER PRODUCTS IN THE SAME CATEGORY:
NTFM 8158, ISN for unshielded Cat 6 lines, Acc CISPR 32
8158 Mag Base, Magnetic Cover for ISN 8158 to attach ISN to steel wall
ISN S1, ISN for Coax Acc CISPR 32
ISN S8, ISN for Shielded Telecom lines, Acc CISPR 32
CAT3 8158, ISN for unshielded Cat 3 lines, Acc CISPR 32
CAT5 8158, ISN for unshielded Cat 5 lines, Acc CISPR 32
SYMAT 40, Symmetrical Step Attenuator, 100 Ohms acc. EN 50561-1
ISN 50561-1, ISN for PLC measurement, acc. EN 50561-1
NTFM 8131, ISN for 2 unshielded Unsymetrical lines, Acc CISPR 32
ISN 50561-3 - Impedance Stabilization Network
PILOT ISN, 150 kHz - 30 MHz, 1.4A, PLC
CS-50, 2 way splitter, 50 Ohms acc. EN 50561-1
SPLIT 100, 2 way splitter, 100 Ohms acc. EN 50561-1
SY 9223-50561-1, Symmetrical Transformer, 50 to 100 Ohms acc. EN 50561-1
CU 50561-1, Coupling Unit , acc. EN 50561-1
AC Separator, acc. EN 50561-1
SY 9223-PLC-AAN, PLC bypass
ECSS LISN 3, 10 Hz - 150 MHz, 10A, DC Lines, LISN
ECSS LISN 2-75A, 10 Hz - 150 MHz, 75A, DC Lines, LISN
