Products
- Frequency Range:
-
Band 1: 20Hz - 10kHz
- Band 2: 10kHz - 1MHz
- Band 3: 1MHz - 30MHz
- Frequency step:
- Band 1: 20Hz/step
- Band 2: 10kHz/step
- Band 3: 500kHz/step
- Includes: Generator, USB Cable, charger, storage box
- Frequency Range:
- 100kHz - 400MHz for AC / DC LISN
- 10MHz/100MHz - 7.5GHz
- Frequency step:
- 100/500 kHz switchable for AC / DC LISN and Monopole Antenna
- 10MHz/100MHz switchable for RE
- Includes: Generator, Charger, Storage case
- Frequency Range:
- 50kHz - 108MHz for AC / DC LISN
- 50kHz - 30MHz with Monopole Antenna (CISPR 25)
- 30MHz - 1GHz (10MHz steps)
- 1 - 6GHz (100MHz steps)
- Frequency step:
- 50/500 kHz switchable for AC / DC LISN and Monopole Antenna
- 10MHz for 30MHz - 1GHz
- 100MHz step for 1 - 6GHz
- Includes: Generator, Charger, Storage case
- Connector to DuT: 6 mm wing terminal including 4 mm banana jack
- 150 kHz to 30 MHz
- 220pF + 510 Ω RC Circuit
- CISPR 16-1-2
Pyramidal standard gain horn Antenna optimized for far-field gain
- 8 - 18 GHz
- 20 dBi Gain
Pyramidal standard gain horn Antenna optimized for gain at 1 meter
- 40 - 67 GHz
- 15 - 18.5 dBi Gain
- Acc. to CISPR 25 Ed. 4 or BMW GS 95025-1
- impedance (5µH) || 50 Ohm
- 70 A, 1000 V (DC)
- Backside with built-in 0.1 microfarad capacitor to ground
- N-jack
- Conducted common mode immunity testing according to IEC 61000-4-6
- Complies with CISPR 16-1-2
- can be used for both emission and immunity testing
Diode Pulse Limiter with built-in 10 dB high power attenuator and fuse lamp to protect sensitive measuring equipment when measuring spectra with high energy. Thanks to the built-in fuse lamp, serious overload situations of sensitive equipment can be recognized fast and reliably. A replacement bulb is placed inside the unit. The pulse limiter prevents expensive equipment defects. The very flat frequency response allows high measurement accuracy, even if only a few sample values are used for correction.
Diode Pulse Limiter with built-in 20 dB high power attenuator and fuse lamp to protect sensitive measuring equipment when measuring spectra with high energy. Thanks to the built-in fuse lamp, serious overload situations of sensitive equipment can be recognized fast and reliably. A replacement bulb is placed inside the unit. The pulse limiter prevents expensive equipment defects. The very flat frequency response allows high measurement accuracy, even if only a few sample values are used for correction.
