CDN T-type - Unscreened balanced lines
The Coupling / Decoupling Networks are used to inject common-mode disturbances to Equipment under Test (EuT). Further, the CDNs provide sufficient decoupling between Auxiliary Equipment (AE) and disturbance signal. The requirements for CDN and their application are described in the standard IEC 61000-4-6 (Immunity to conducted disturbances, induced by radio-frequency fields). CDNs have a common mode impedance of 150 Ohm and are available for a multitude of cable types and connectors.
PARTNER:
MARKETS:
TEST STANDARDS:
CDN Overview
SPECIFICATIONS
CDN T Type - Balanced / Unscreened Decoupling Network
Coupling Decoupling Network (CDN) built to the requirements of IEC 61000-4-6. CDNs have a common mode impedance of 150 Ohm. T Type is for testing:
|
OTHER PRODUCTS IN THE SAME CATEGORY:
AN-ABCD-60, 60 Amp Artificial Network, EV HV Testing
CABCISPR2532A, CISPR 25, 5uH, 32 A LISN
CABCISPR2515A, CISPR 25, 5uH, 15 A LISN
Cx 10000-xxx-xxx, 1000V, 100 - 600 amp 10mF HV Capacitor Cabinet
NSLK 8117, 9 kHz - 30 MHz, 250V / 10A, 50 µH, 2 Path LISN
NNBM 8124, 10 kHz - 150(400) MHz, High Voltage, 70A, single path, 5µH LISN
MDS 21 C, 30 - 1000 MHz, EMI Absorbing Clamp
NTFM 8131 A, ISN for 2 unshielded Unsymetrical lines, Acc CISPR 32
NNBM DO160-1500, 10 kHz - 400 MHz, 200A, 5µH LISN, DO-160
NNBM 8126 A890, 10 kHz - 400 MHz, 75A, 5µH LISN, DO-160
NNBL 8226-2, 9 kHz - 100 MHz, 70A, 50µH, Two Path LISN
NNBL 8226-HV, 9 kHz - 100 MHz, 70A, 50µH, Single Path LISN
NNBL 8226, 9 kHz - 100 MHz, 70A, 50µH, Single Path LISN
NNBL 8225, 9 kHz - 100 MHz, 20A, 50µH, Single Path LISN
NSLK 8126, 9 kHz - 30 MHz, 250V / 16A, 50 µH, 4 Path LISN
NSLK 8127, 9 kHz - 30 MHz, 250V / 16A, 50 µH, 2 Path LISN
NNBM 8124-800, 0.1 - 150 MHz, High Voltage, 800A, single path, Automotive LISN
NNBM 8124-400, 0.1 - 150 MHz, High Voltage, 400A, single path, Automotive LISN
NNBM 8124-200, 0.1 - 150 MHz, High Voltage, 200A, single path, Automotive LISN
