Standards

Products

VBA230 Series — 150 kHz to 230 MHz Class-A RF Power Amplifiers

  • Class-A operation for low distortion and highly linear RF output
  • 100% mismatch tolerant (Infinity:1 VSWR) with no fold-back protection required
  • Push-pull MOSFET architecture for even-order harmonic suppression
  • Wide instantaneous bandwidth from 150 kHz to 230 MHz
  • Compact rack or bench configurations for lab and chamber use
  • Designed for continuous EMC testing environments

VBA200-3000 — 12 MHz to 200 MHz, 3kW, Class-A RF Power Amplifiers

  • Class-A operation for low distortion and highly linear RF output
  • 100% mismatch tolerant (Infinity:1 VSWR) with no fold-back protection required
  • Push-pull MOSFET architecture for even-order harmonic suppression
  • Wide instantaneous bandwidth from 12 to 200 MHz
  • Compact rack or bench configurations for lab and chamber use
  • Designed for continuous EMC testing environments

VBA0742 Series — 0.7 to 4.2 GHz Class-A RF Power Amplifiers

  • Class-A architecture 
  • GaN Quadrature Hybrid
  • Wideband 700 MHz – 4.2 GHz 
  • Unconditional stability & extreme VSWR tolerance 
  • Integrated digital interfaces (select models)

VBA2060 Series — 2 to 6 GHz Class-A RF Power Amplifiers

  • Class-A architecture 
  • GaN Quadrature Hybrid
  • Wideband 2 – 6 GHz 
  • Unconditional stability & extreme VSWR tolerance 
  • Integrated digital interfaces (select models)

VBA0860 Series — 0.8 to 6 GHz Class-A RF Power Amplifiers

  • Class-A architecture 
  • GaN Quadrature Hybrid
  • Wideband 800 MHz – 6 GHz 
  • Unconditional stability & extreme VSWR tolerance 
  • Integrated digital interfaces (select models)

VBA0660 Series — 0.6 to 6 GHz Class-A RF Power Amplifiers

  • Class-A architecture 
  • GaN Quadrature Hybrid
  • Wideband 600 MHz – 6 GHz 
  • Unconditional stability & extreme VSWR tolerance 
  • Integrated digital interfaces (select models)

BBHA 9120 C - 2-18 GHz Double Ridged Horn Antenna

The broadband horn antenna BBHA 9120 C is a linear polarized double ridged horn antenna.

  • 2 GHz to 18 (20) GHz
  • SMA - female

STLP 9128 E special - 80-1700 MHz Stacked Log Periodic Antenna

The STLP 9128 E special is nearly identical like the STLP 9120 E but with folded longest elements and smaller structure angle.

  • 80 - 1700(2700) MHz
  • Type N (female) or Type 7/16 (female)

ABSOLUTE EMC Monopole Probe Stand

The original ABSOLUTE EMC MP-Probe Stand is explicitly designed for the EMC market. A low-cost and easy-to-use probe stand with no metallic parts. The EMC Monopole Probe Stand is easy to assemble. It is fully adjustable in height with the center mast section. Materials used are low permittivity allowing for use in most EMC applications to hold antennas, cameras, RF field probes, cables off the floor, and other support possibilities. No metal is used in any part of the stand. The field probe holders use PTEG plastic screws to hold the probe in place. The MP Probe Stand design allows for a small footprint for easy maneuvering around and reduces tripping caused by tripods. If any plastic pieces break, they will be replaced free of charge for the product's life.

CAR AWG 6000, 4-quad, 200A Battery Simulator

The CAR arbitrary waveform generator 6000 is a compact EMC testing system for performing voltage variations on supply lines of vehicles. The system strictly complies with the international standards and manufacturer standards that describe phenomena on the power supply of vehicles. Thus, the CAR arbitrary waveform generator 6000 is the optimal voltage power source for battery simulation up to 70V. It can simulate pulse 2b, pulse 4, starting profile, superimposed alternating voltage, and others, up to a battery current of 100A.


Loading...