The original ABSOLUTE EMC MP-Probe Stand is explicitly designed for the EMC market. A low-cost and easy-to-use probe stand with no metallic parts. The EMC MP Probe Stand is easy to assemble. It is fully adjustable in height with the center mast section. Materials used are low permittivity allowing for use in most EMC applications to hold antennas, cameras, RF field probes, cables off the floor, and other support possibilities. No metal is used in any part of the stand. The field probe holders use PTEG plastic screws to hold the probe in place. The MP Probe Stand design allows for a small footprint for easy maneuvering around and reduces tripping caused by tripods. If any plastic pieces break, they will be replaced free of charge for the product's life.

The EMC MP Probe Stand is 3D Printed with PLA plastic and uses 1" hardwood dowels for the structure. The kit includes the (1x) MP-Section, (1x) MP-Extension, (1x) MP-Base, (4x) MP-Probe Adaptor, (1x) MP- Ballast Bag, (1x) TP-Leveling Bubble, and (7x) 1" Hardwood dowels 3 ft long. Or you can choose to purchase pieces and build the antenna monopole yourself. Any 1" wood dowel can be used with the system. 3 ft dowels are standard with a complete kit order. Dowels are available at most lumberyards. Dowels can be cut down for a shorter height, or longer lengths can be purchased for an application where more height is needed.

**All 3D Printed products from Absolute EMC come with an unlimited warranty. If any items become worn out or become damaged, we will replace them free of charge.

Specifications:

*Use good engineering judgment for weight loading. It is not designed for heavy antennas/loads or where the center of gravity is overhanging from the center. 

 Ordering information: 

Name	Picture	Description
Monopole Section		Included in Monopole Probe Stand Kit. The top section of the Monopole. Holding the 4x 1" wooden dowels
Monopole Base		Included in Monopole Probe Stand Kit. The base is made up of a polyurethane-coated piece of plywood ruffly 15" x 15" x ¾" w/easy slide pads on the bottom to help with saying level to the floor and a plastic base for 3x 1" dowels.
MP- Ballast Bag		One is included with Monopole Probe Stand Kit. This can be filled with a weighted material (e.g., Sand) to make the base heavier. It may not be needed in all cases, dependent on user loading.
MP-Extension		Included in Monopole Probe Stand Kit. An extension piece to use another set of dowels (3 more 1") to extend the height. Add 36" (91.5 mm) to the height
Tripod Head		Included in Monopole Probe Stand Kit. It sits on top of a 1" wood dowel. Select a size (¼” – 20, 5/16” – 18, 3/8” – 16)
TP-Leveling Bubble		Included in Monopole Probe Stand Kit. It is used to see the level of the tripod. Clips on to 1” center dowel and is rotated to any side for easy viewing.
TP-Weight Ballast		A bag is included with your order. Nonmetallic weighted materials can be used to fill the bag to make the base sturdier.
TP-22mm Antenna (Optional)		Antenna adaptor for 22mm antenna tube mount. It sits on top of a 1" wood dowel
TP-Ball Head (Optional)		Ideal for Camera positioning. Full rotation to 90° polarization  ¼” – 20 thread screw. For loads less than 2lb. The arm can be positioned after the head is screwed to the camera, allowing it to be placed to the rear.
TP-Cable Support (Optional) EMC EPS Block 1M		Can be used to support cables coming out of antenna or EUT, to keep them up from the floor, or to reduce strain on connectors.10-¼” x 1-½” (28 x 3.8 cm)Use with 1 meter EPS support for longer support.
TP-Item Tray (Optional)		A tray to hold items on top of the tripod. 8” x 8” (20 x 20 cm)
MP-Probe Adaptor		4x Included in Monopole Probe Stand Kit. Attaches with a thumbscrew to 1" wood dowels, extend out 5-3/4" (145mm) from the dowel Includes:    ¼-20 plastic screw for probe mount.     A 2-3/4" (70mm) extension is provided to offset the probe if positioning where MP-section or MP-Extention is located
MP-Rotator (Optional)		For rotating the camera or object over the top of the test bench to view the top of EUT/DUT. Freedom to rotate 360 deg in all directions. -Use to help hold up cables. -Use to add a second mount to any tripod/monopole
TP-Bag (Optional)		Travel bag for storing and caring the tripod size: 39” x 7”
TP-Bag Deluxe (Optional)		Wheeled travel bag for storing and caring the tripod and accessories 40” long (36”x10”x12” internal) large enough to hold additional EMI test gear and accessories. Padded with Velcro partitions
Custom Antenna Adaptors		Designed for your antenna to rotate on center, at the center of gravity. Designed from pictures and measurements done on your end. 6 months of free updates if the design is not acceptable.
Other?	Have an idea for an accessory to make the tripod more versatile please let us know