Products
The CDG 7000 is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields - including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, an RF power amplifier, a 3-channel RF voltmeter, and a directional coupler at a very affordable price.
- Capability:
- Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines, report generation, and notes.
- Customization of the robot arm size, any size, is possible.
- Spatial scan time:
-
- The scan time depends on size and area
- Ideal for large component boards
- The robotic arm allows for advanced scans on complex items
- Supported operating systems: Windows 10®
- Supported overlays: Picture in JPEG format
- Standard Gerber© RS274x format and HPGL form
- The EPS Test Table Lt is a simple, inexpensive solution for your EMI testing. It is made from durable, expanded polystyrene (EPS) material and can be customized to your requirements. Complies with CISPR, ISO, & IEC requirements for having a low permittivity and can be used for additional standards.
- High strength EPS 3lb per ft3
- Low Permittivity >1.04
- Made for moderate 200 lb.
- Options
- vinyl topper with your company logo
- epoxy coating for the top (can be combined with vinyl)
The CDG 7000 is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields - including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, an RF power amplifier, a 3-channel RF voltmeter, and a directional coupler at a very affordable price. IEC 60601-1-2 calling out IEC 61000-4-39 magnetic immunity for close proximity testing requirements can also now be met with the 10 kHz unit.
opto, Fiber-optic, Automotive Link Overview
Highlights of the CS116 Damped Sinusoid Generator
- MIL-STD 461 CS116 Compliant: Meets stringent military testing standards.
- Flexible Frequency Options: Choose from 6, 9, or 17 test frequencies.
- Comprehensive Accessories: Includes injection probe, attenuator, oscilloscope, and control software.
- Efficient Operation: Single signal output reduces test time and supports automation.
- User-Friendly Control: Easily controlled via RS232 and USB interfaces.
- Robust Design: Durable construction with wide power compatibility (90–264 Vac).
- Upgradable: Add CS115, CS106, CS114
Optimize your naval and industrial testing with the CS116 Damped Sinusoid Generator—precision and efficiency combined.
Audio Transformer 200W, 50A
- 160x155x200mm
- 2:1 ratio
- 200 W Maximum30Hz - 250 kHz
- 100 W Maximum at15 Hz - 30 Hz
- Insulation Resistance Test - 2kV
- High current power stage (uni-directional)
- Up to 32 channels for switching low-current signals (bi-directional)
- Switching of resistive, inductive, capacitive passive, and active loads/devices
- Input voltage up to 100V
- Output current up to 200A DC
- DC - 200 kHz bandwidth DC
- MHz (small signal -3 dB)
- Output voltage ±75 Vpk
- Rise / fall time 100 V/µs
- USB interface standard, LAN optional
- Analog control input 0 ... ±10 V for control of voltage and current
- Monitor outputs for measured voltage and current values (not all models)
- Modularly extensible via master-slave mode
- Parallel and Series Connections for two or more units
By Frequency Range
