CAR coupling network 50-1 is used to couple, according to ISO 7637-4:2020. Offered By HILO-TEST through Absolute EMC.

CAR CN 50-1, 30 Hz - 300 kHz Coupling Transformer

The CAR coupling network 50-1 is used to couple, according to ISO 7637-4:2020, the required sinusoidal disturbances into the DUT. This transformer also facilitates d.c. isolation of the LF generator from the DUT. The transformer has a current rating of 50A (rms) for the DUT.

PARTNER:

HILO-TEST

MARKETS:

Automotive ,

TEST STANDARDS:

Data Sheet

SPECIFICATIONS

CAR CN 50-1

Coupling network for low-frequency sinusoidal disturbances

Coupling transformer
Frequency range 30Hz – 300kHz
Voltage capability: 600V
Current capability: 50A (rms)

According to: ISO 7637-4: 2020

Option	Description

CAR AN-HV	Artificial Network, switching Load, 100µF Capacitor
CAR-PS1500	Power Supply 1500V / -30A - 30A
CAR-AWG25	Disturbance source: sine wave generator for test pulse A
CAR-AWG1200	Disturbance source: low-frequency generator for test pulse B
CAR-CN50	Coupling module
CAR-CNB1	Coupling balun transformer
PC Software CAR-Remote (required for CAR-AWG)	To control CAR – AN-HV To control CAR-PS To control CAR-AWG

The software program CAR-remote permits the PC control of the CAR-System via Ethernet and allows the standardized documentation according to IEC 17025 and the evaluation of test results.

TECHNICAL SPECIFICATIONS:	CAR – CN50-1

Mainframe
Ethernet Interface for remote control of the generator	Built-in
Connector for external safety interlock loop	24 V=
Mains power	90V - 264V, 50/60 Hz
Dimensions, case, W * H * D	450180500 mm³
Weight	10kg

Transformer
Isolation transformer
Frequency range	30Hz – 300kHz
Max. Power	200W
Max. Current	50A (rms)
Max. Voltage	600V
Cooling	Controlled fans and heat sink
Overcurrent Protection with CAR SYS	Magnetic and Thermic
Triggering with CAR SYS	Software - Manual - Extern
Trigger output with CAR SYS	For Oscilloscope