Products
- DC to 25 MHz Bandwidth
- Pulse or CW analog signals
- Up to 1km Tx/Rx distance
- Battery Powered
EMI Measurements:
- FFT-based dual-channel receiver
- According to CISPR16-1-1
- Peak, Quasi-Peak, and Average Detectors
- Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
- The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)
EMI Measurements:
- FFT-based dual-channel receiver
- According to CISPR16-1-1
- Peak, Quasi-Peak, and Average Detectors
- Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
- The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)
- Measure 4 lines of 3 phase LISN
- The picture is shown with internal LISN [EMSCOPE RX4 LZ2]
- 80Hz to 3.5GHz Bandwidth
- Pulse or CW analog signals
- Up to 1km Tx/Rx distance
- Battery Powered
EMI Measurements:
- FFT-based dual-channel receiver
- According to CISPR16-1-1
- Peak, Quasi-Peak, and Average Detectors
- Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
- The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)
Benefits of the PG-CS115 Pulse Generator
- MIL-STD 461 Compliant: Meets stringent military standards for reliable testing.
- Flexible Configurations: Available as standalone (PG-CS115) or modular (M-CS115) units.
- Comprehensive Accessories: Optional injection probe, attenuator, oscilloscope, and control software.
- High Precision: Delivers accurate rectangular pulses with rapid rise/fall times (≤ 2 ns).
- Versatile Testing: Supports single and repetitive pulse rates from 1 to 50 Hz.
- Compact Design: Lightweight and portable, ideal for various testing environments.
- Reliable Performance: Durable construction ensures long-term use in demanding settings.
Enhance your EMC testing with the CS115 Pulse Generator—precision, compliance, and versatility combined.
- DC to 500 MHz Bandwidth
- Pulse or CW analog signals
- Up to 1km Tx/Rx distance
- Battery Powered
- Advanced Ripple Testing: Meets ISO 21498, LV123, VW 80300, Nissan MES PW 67602, Mazda, and emerging standards.
- Series Amplifier Integration: High accuracy ripple injection, minimal distortion, and enhanced safety.
- Waveform Versatility: Sine, square, trapezoidal, pulses, and triangle waveform generation.
- WaveMaster Software: Fast DUT impedance measurement, automated test sequences, and dynamic voltage/current control.
- High Power Capability: Ripple Voltage up to 100 Vpp, currents from 100A to 2000A+, and frequency range 10 Hz–300+ kHz.
- Future-Proof Design: Modular architecture for easy upgrades and adaptation to new standards.
Benefits of the PG1275F Pulse Generator
- MIL-STD-1275F Compliant: Dedicated design for conducted susceptibility testing on 28 VDC circuits.
- Spike & Surge Testing: Handles spikes up to 250 V / 250 mJ and surges up to 100 V / 1210 J.
- High Current Capability: 16 A continuous or up to 400 A with the optional DM400 decoupling diode module.
- Adjustable Waveforms: Configurable rise times, pulse durations, and voltages for precise test conditions.
- User-Friendly Control: Remote interface via RS232 or USB, with optional control software for automated testing.
Enhance your EMC testing with the 1275F Pulse Generator—precision, compliance, and versatility combined.
The CDG 7000 is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields - including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, an RF power amplifier, a 3-channel RF voltmeter, and a directional coupler at a very affordable price.
