EMC EPS Pad- 5x50x50 cm, EUT support

The original EMC EPS Pad is white Expanded Polystyrene, which can optionally be a painted coating to extend durability. They come in dimensional metric sizes of 5 x 50 x 50 cm, which matches EUT height requirements for IEC testing above the ground plane for ISO, MIL, IEC 61000-4-5, and IEC 61000-4-6. Keep your test setup looking professional with these lightweight and soft EUT supports. It is ideal for use in EMC testing for EUT and cable supports. The EMC EPS Pad is crush-resistant and able to withstand heavy weight loads without deforming. 1cm marking on all 6 sides allows for easy positioning and test setups. They are conveniently sold in kits in tote bins for secure storage.

Data Sheet

SPECIFICATIONS

   

EMC EPS Pad- EUT Support Blocks 5cm Hieght

 Use EMC EPS Cube, Blocks, Pad and Rods for IEC, ISO, CISPR, MIL-STD, and DO160 testing. It has stable dielectric properties better than wood, does not retain moisture, and gives better results for testing over time. Our EPS materials are made of a heavier density than standard commercial applications (i.e. Foam sheets from a home store). This gives our products a >50% higher durability  If you have requirements for a hundred lbs/kgs heavy loads, please see our line of EMC PLA Block Kits.

 

Specifications:

 

Material: Expanded Polystyrene (EPS) Optional Coatings:   Painted surface
Sizes Cube: 5x50x50cm   ±2%    
       
Permittivity: 1.02-1.04 of EPS    
Minimum Density: 3.00 lb/ft³ (48 kg/m³)    
Compressive Strength: 60.0  psi (414 kPa) Other: 1cm marking 6 sides

 

 

 

 

 

 

 Support requirements for basic standards:

 

Standard

IEC 61000-4-4

IEC 61000-4-6

IEC 61000-4-18

MIL-STD-461

DO160

EUT Support

10cm

10cm

10cm

NA

NA

Cable Support

10cm

>3cm

10cm

5cm

5cm

 

 

 

 

OTHER PRODUCTS IN THE SAME CATEGORY:
Loading...