• Axos 8 - Compact 7kV Surge, Telecom, Ring Wave, 5kV EFT, Dips/Drops
  • Axos 8 - Compact 7kV Surge, Telecom, Ring Wave, 5kV EFT, Dips/Drops
  • Axos 8 - Compact 7kV Surge, Telecom, Ring Wave, 5kV EFT, Dips/Drops
  • Axos 8 - Compact 7kV Surge, Telecom, Ring Wave, 5kV EFT, Dips/Drops

Axos 8 - Compact 7kV Surge, Telecom, Ring Wave, 5kV EFT, Dips/Drops

Axos 8 - Compact

  • Multi Tester with 16AMP CDN
  • EFT/Burst 5kV IEC 61000-4-4
  • Surge, Combination Wave 7kV IEC 61000-4-5
  • Surge Magnetic field IEC 61000-4-9 (MSURGE-A loop antenna required)
  • Ring Wave, 7kV IEC 61000-4-12 & ANSI
  • Telicomm Wave, 7kV IEC 61000-4-5 & ITU
  • AC Dips/Drops IEC 61000-4-11 (DIP 116 dips transformer required)
  • DC Dips/Drops IEC 61000-4-29 (2x DC supplies required)

PARTNER:

MARKETS:

TEST STANDARDS:

Select Options/Sizes:

AXOS Brochure

AXOS 8 Data Sheet

SPECIFICATIONS

AXOS8 - Compact Test System

The AXOS8 expandable test system integrates the best features of several stand-alone test systems into one economical solution.

It can be individually combined with a 7 kV Surge Combination Wave, a 7 kV Ring Wave, a 7 kV Telecom Wave*, a 5 kV EFT/Burst, or Dips & Interrupts, along with an integrated single-phase coupling / decoupling network. This allows quick and completely automated testing to the most common IEC, EN, ANSI, ITU, IEEE, and UL standards.

The AXOS8 can be operated via the front panel by a large color graphic interface or remotely from the PC. The easy-to-use menu and the availability of predefined test routines for different standards make testing easy and reliable,

even for less frequent users. Numerous additional functions, such as the external start/stop function, allow easy test system integration in customer-specific test environments.

All the test parameters can be varied in a range that is far above the requirements of the standards. Together with the ability to change test parameters during testing, AXOS8 is not only the ideal product for compliance and pre-compliance testing, but it is also useful for monitoring and debugging during the design phase.

A wide range of cost-efficient and user-friendly coupling / decoupling networks for power lines, symmetrical and asymmetrical data, and signal lines are available as options.

 *For Axos8 with “TW 8” module

Features 

  • Easy to operate with manual and automated test modes, software-assisted test preparation, pre-defined test routines, and visually aided test setups
  • Economic & Efficient
  • Touch screen guarantees reduction of time and effort -Experience and know-how at a reasonable price
  • Safe and reliable operation by using safety interlock, warning lamp, and emergency stop functions
  • Voltage and current monitoring of surge impulses and power provide valuable feedback to the test engineer.
  • Automatic generation of test reports, including test parameters, test setup, and test result

STANDARDS

  • IEC/EN 61000-4-4 EFT / Burst Ed. 2&3
  • IEC/EN 61000-4-5 Surge E. 2&3 (1.2/50μs... 8/20μs )
  • IEC/EN 61000-4-5 Surge (10/700μs)
  • IEC/EN 61000-4-9 Magnetic Field
  • IEC/EN 61000-4-11 AC Dips and Interrupts
  • IEC/EN 61000-4-12 Ring Wave
  • IEC/EN 61000-4-29 DC Dips and Interrupts
  • IEC/EN 61000-6-1 Generic Residential
  • IEC/EN 61000-6-2 Generic Industrial
  • IEC/EN 60335-1 Household
  • IEC/EN 60601-1 Medical
  • IEC/EN 60950
  • EN 55024
  • IEEE C62.41
  • ITU K.20, K.21, K.44, K.45

 APPLICATIONS

  • Compliance & pre-compliance testing of electrical products
  • CE marking
  • Product development and debugging
  • Compliance testing of telecom and wireless devices
  • Overtesting
Available Versions - Buy what you need, and add capability when you need
Model 7kV Surge
IEC 61000-4-5
1.2/50μs, 8/20μs		 7kV Telicomm
IEC 61000-4-5
10/700μs		 5kV EFT
IEC 61000-4-4
5/50ns		 Surge MagField
IEC 61000-4-9 		 AC Dips/Drops
IEC 61000-4-11 		 7kV Ring Wave
IEC 61000-4-12
IEEE 62.41		 DC DIPS/Drops
IEC 61000-4-29
AXOS8 Compact
No. 2490800 		X X
TW 8		 X X
MSURGE-A		 X
DIP 116		 X X
DC Supply
AXOS8 Surge
No. 2490810 		X     X
MSURGE-A		      
AXOS8 Telecom Wave
No. 2490850		   X
TW 8 Incl.		          
AXOS8 EFT/Burst
No. 2490830		     X        
AXOS8 Dips
No. 2490840 		        X
DIP 116, Incl.		    X
DC Supply
AXOS8 Ring Wave
No. 2490820 		          X  

 Included accessories: Mains Cable, User Manual, Calibration certificate, [Telecom Wave Modul “TW 8” 10/700μs(w/2490850)], [Automatic dips single phase transformer. “DIP 116”(w/2490840)]

Any combination of tests can be added to the Axos system—for example, Surge + Ringwave, Surge + EFT, or Dips + EFT—but if you need to add three or more tests together, the Axos8 Compact No. 2490800 model is required.

 

General AXOS5 SPECIFICATIONS
Display 7“ / 800x480 / 24 bit with touchscreen AC Synch Input BNC, 10 V – 264 V AC
External trigger input 5 V TTL Analog output 0 – 10 V, for use with external options
Trigger output 5 V TTL Safety circuit stops the test when unlocked
EUT failed input 5 V TTL Warning lamp output 2 x 24 V / 1 A DC
External start/stop input 5 V TTL, starts / stops predefined test sequence User test storage Unlimited
AUX. interface D-sub 37p is for external CDN, external transformer, etc. Remote interface Ethernet, RJ45
USB for USB memory stick Dimensions 19“ / 6U (45 x 27 x 50 cm)
Internal CDN V 264 V AC/DC Weight 30 kg
Internal CDN A 16 A AC/DC Continuous
(500 A inrush current)		 Control power 85 V - 264 V 50/60 Hz
IEC / EN 61000-4-4 EDITION 2 & 3 EFT / Burst 
Output voltage 0.2 – 5.0 kV ±10% at coaxial output (SHV BNC) Spike frequency 1 Hz – 1 MHz 
Polarity pos/neg/alternate Burst duration 10 µs – 1 s
Output impedance 50 Ohm  Burst period  1 ms – 10 s
Rise time 5 ns ±30% Test time  1 s– 1,000 minutes, infinite 
Impulse duration 50 ns ±30% at 50 Ohm 50 ns
–15 +100 ns at 1,000 Ohm 		 Trigger  automatic, manual, external trigger input 
Burst mode normal, continuous, real, random  Integrated single-phase coupling / decoupling network 264 V AC / 16 A up to 220 V DC / 10 A
 IEC / EN 61000-4-5 EDITION 2 & 3 Surge combination wave
Output voltage 0.2 – 7.0 kV ±10%  Output current  0.1 – 3.5 kA ±10%
Voltage rise time 1.2 µs ±30% Current rise time 8 µs ±20%
Voltage duration  50 µs ±20%  Current duration 20 µs ±20%
Polarity positive/negative/alternate  Integrated single-phase CDN 264 V AC / 16 A up to 220 V DC / 10 A
Output impedance 2 Ohm  Impulse trigger  Automatic 2 s – 100 min manual external trigger input  
Phase sync  0 – 359° with 1° steps or asynchronous mode 
Counter preselect  1 – 1,000 / infinite  Counter  100,000 
Peak voltage monitor  BNC output: 1000:1 display: 3 digits  Peak current monitor  BNC output: 1 kA/V display: 3 digits 
IEC / EN 61000-4-5 Telecom Wave / ITU K.20, K.21, K.44, K.45 (external TW 8 module)
Output voltage 0.2 - 7.0 kV ± 10% Source impedance/coupling 15 Ohm x 1 - 40 Ohm x 440 Ohm gas arresters x 4
Front time OCV 10 μs ± 30% Front time SCC 5 μs ± 20%
Decay time OCV 700 μs ± 20% Decay time SCC 320 μs ± 20%
Polarity Pos., neg., alt. Weight 10 kg
Outputs 4 mm banana socket Dimensions 19'' / 4U, (45 x 18 x 49 cm)
IEC / EN 61000-4-11 EDITION 2 & 3 AND IEC / EN 61000-4-29 DIPS & INTERRUPTS  
Max. voltage 264 V AC/DC Interrupt time  0.5 period – 800 periods
100 µs – 1000 minutes
Max. current 16 A AC/DC Continuous
20 A for 5 s 23 A for 3 s 40 A for 3 s
> 500 A inrush current		 Interval time  1 period – 800 periods
1 ms – 1000 minutes 
Trigger Automatic, manual, external Test time 1 s – 1000 minutes, infinite
Interrupt Dip level 0% 0% – 99% (ext. voltage source)  Phase sync 0 – 359° 16 / 40 / 50 / 60 Hz
asynchronous mode
RMS voltage monitor  BNC output: 100:1
display: 3 digits		 RMS current monitor BNC output: 10 A/V
display: 3 digits 
IEC / EN 61000-4-12 EDITION 2 AND ANSI / IEEE C62.41 Ring Wave
Max. voltage 0.2 - 7.0 kV ± 10%  Repetition rate Up to 30 pulses/min
Frequency 100 kHz  Polarity Positive/negative/alternate
Rise time OC  5 μs  Floating output Max. 460 V / AC
Rise time SC  1 μs  Phase sync accuracy ± 1°
Impedance  12 Ohm, 30 Ohm  Damping rate 0.4 < peak1/peak2 < 1.1
0.4 < peak3/peak2 < 1.1
0.4 < peak4/peak3 < 1.1
Peak voltage monitor  BNC output: 1000:1 -Disp: 3 dig.  Peak current monitor BNC output: 1kA / V Disp: 3 dig

 

 OPTIONS AND ACCESSORIES

Coupling
FP-COMB 32 Automatic combined 3-phase Coupling/Decoupling Network for Surge, Ring Wave, EFT/Burst, 32 A (480 V AC/DC) No. 2490430
FP-COMB 63/690-1 Automatic combined 3-phase Coupling/Decoupling Network for Surge, Ring Wave,EFT/Burst 63 A (690 V AC/DC) No. 
FP-SURGE 100M2 Manual 3-phase CDN for Surge, 100 A (690 V AC / 110 V DC) No. 2490180
FP-EFT100M2 Manual 3-phase Coupling/Decoupling Network for EFT/Burst, 100 A (690 V AC / 110 V DC) No. 2495860  
IP4B EFT/Burst Capacitive Coupling Clamp according to IEC/EN 61000-4-4 Ed. 3  No. 2491300  
PCD 121 Surge Combination Wave 1.2/50 µs…8/20 µs Coupling Network for testing symmetrical data and control lines, max. 4 wires  No. 2498010
PCD 126A Surge Combination Wave 1.2/50 µs…8/20 µs Coupling Network for testing asymmetrical data and control lines, max. 4 wires & Ring Wave 100 kHz Coupling Network for testing symmetrical and asymmetrical data and control lines, max. 4 wires No. 2498030
DEC 5 Decoupling Network for testing symmetrically operated lines with Surge, Ring Wave 100 kHz, and Telecom Wave 10/700 µs, max. 4 wires  No. 2490141  
DEC 6 Decoupling Network for testing symmetrically or asymmetrically operated lines with Surge, Ring Wave 100 kHz, and Telecom Wave 10/700 µs No. 2490151  
DEC 7 Decoupling Network for testing asymmetrically operated lines with Surge, Ring Wave 100 kHz, max. 4 wires No. 2490161  
PCD-1000-4 1Gbit High-Speed Data Line CDN for Surge up to 4kV No. 0782012  
Verification/Calibration Accessories  
EFT/Burst Verification Set EFT/Burst Verification Set for Verification of EFT/Burst Impulse according to IEC/EN 61000-4-4 Ed. 3 (set includes PAT 50A + PAT 1000) No. 2499951
Verification Adapter AXOS Verification Adapter AXOS, Used with 2499951 No. 4700783  
Transducer Plate Transducer Plate for IP4B Capacitive Coupling Clamp Verification/Calibration according to IEC/EN 61000-4-4 Ed. 3 No. 0781820  
PDP 8000 Differential High Voltage Probe 1000:1 Used for Surge/Ring Wave Voltage No. 2499911  
CP 101 Current Probe Model 101 Used for shorted Surge/Ring Wave Current No. 2499931  
 Software      
AXOS Remote Control Remote Control Option for AXOS 5 & AXOS 8 No. 2490440-S
AXOS Reporting Software Reporting Software for AXOS 5 & AXOS 8 No. 4700975
Others      
AXOS, TW 8 Telecom Wave 10/700 µs Impulse Module for Axos8 only No. 2490851
DIP 116 Automatic Dips Transformer 16A for AC Voltage Dips according to IEC/EN 61000-4-11 No. 2490410
MSURGE-A Pulsed Magnetic Field coil 1 x 1 m according to IEC/EN 61000-4-9 No. 2490441  
Switch Box AXOS Switchbox for connecting more than two units to AXOS (e. g. FP-COMB 32 and TW 8) No. 4701044
ES-P12 External Emergency Stop Switch No. 4700751  
WL-P12 External Warning Lamp No. 4700750  
VTM 15000 Impulse Transformer for Insulation Testing 1.2/50 µs (a separate Surge generator will be needed) No. 2499960  
VTM 15000/05 Impulse Transformer for Insulation Testing 1.2/50 µs low energy 0.5 Joule (a separate Surge generator will be needed) No. 2499692  
Factory Calibration is included with the unit    
AccCal AXOS 8 Compact Accredited Calibration to ISO / IEC 17025 of AXOS8 Surge, EFT, Ring wave, Dip/Drops No. 2490900  
AccCal AXOS 8 Surge Accredited Calibration to ISO / IEC 17025 of AXOS8 Surge No. 2490905  
AccCal - AXOS 8 EFT/Burst Accredited Calibration to ISO / IEC 17025 of AXOS8 EFT No. 2490910  
AccCal - AXOS 8 Ring Wave Accredited Calibration to ISO / IEC 17025 of AXOS8 Ring Wave No. 2490915  
AccCal - AXOS 8 Voltage Dips Accredited Calibration to ISO / IEC 17025 of AXOS5 Dip/Drops No. 2490920  
AccCal - DIP 116 Accredited Calibration according to ISO / IEC 17025 of Dip 116 No. 2490421  
AccCal - TW8 Accredited Calibration according to ISO / IEC 17025 of TW 8  Telicomm pulse No. 2490925  

 

SOFTWARE

REPORTING SOFTWARE

The reporting software automatically creates a test report. The main header can be adjusted with the individual company logo or any other text required. The data input can be supplied directly via the remote control software or when saving the data on a USB drive. Furthermore, the data can be used directly from the sequence mode menu, and the report is generated. Detailed information will be provided with the reporting software tool itself. The reporting software is compatible with Windows 7 and Windows 10 (32- and 64-bit).

REMOTE CONTROL SOFTWARE

The optional remote control software simply enables the user to control the AXOS5 and AXOS8 remotely using a standard PC, Tablet, or Smartphone. The connection can either be established by inserting an ethernet cable “point to point” or via a Wi-Fi network (a separate access point will be required). 

 
 
Please visit our Rental Partners Transient Specialist and Advanced Test Equipment Corp.
 
OTHER PRODUCTS IN THE SAME CATEGORY:
Loading...