Products
The broadband horn antenna BBHA 9120 E is a linear polarized double ridged horn antenna
- (0.8) 1 GHz to 6 GHz
- N - female
The broadband horn antenna BBHA 9120 G is a linear polarized double ridged horn antenna
- 0.4 GHz to 2.8 GHz
- 7/16 - female
Antenna adapter to fix STLP 9128 E, STLP 9128 E special, STLP 9128 D, STLP 9128 D special on AM 9144.
- Allows antenna rotation without height adjustment.
- The antenna can be fixed in the center of gravity without any collision
- Adapters with the AM 9144 during polarisation change.
The BBHA 9120 K is a linear polarized high gain horn antenna for immunity testing at short distances, specially optimized for Automotive 600 V/m Pulse Radar Test
- 1.2 - 1.4 GHz
- Generates 600 V/m with < 250 W
- 10 µF ±10 % Capacitance for effective low-frequency decoupling
- 1,000 VDC / 640 VAC dielectric strength, rated up to 600 VAC (400 Hz) and 270 VAC (890 Hz)
- Meets MIL STD 461E/F/G & DO 160G §17 requirements for conducted immunity testing
- Compact Aluminum Housing (80 × 62 × 120 mm, 270 g) with 4 mm safety banana jacks
- Wide Temperature Range (–25 °C to +60 °C) for laboratory and on site environments
- Ideal for LISN Decoupling between DUT side terminals in low-frequency surge and immunity tests
The broadband horn antenna BBHA 9120 LF is a linear polarized double ridged horn antenna.
- 0.7 GHz to 6 GHz
- N - female
-
Symmetrically folded antennas, Helical antennas, Tuned sleeve antennas - Axis aligned as a straight extension of the coaxial feed cable
- According to ISO 11452-9, Handy Trasmiter requirements
- 20 Watts
- Type N & BNC
Linear polarized stacked Logarithmic Periodic Broadband Antenna with aluminium tubing for immunity testing with extremely high power.
Detachable Antenna Mast System (glass-fiber tubing) for VHF-UHF Antennas manual height scanning 0.4 m to 4 m insulated mast and antenna box with 0°/90° detents zinc-plated / stainless steel 3-leg mast foot
The High-Voltage Test-Set HVTS 5010 is designed for high-voltage testing of the electrical insulation of electrical equipment and electrical systems. The test voltage is adjustable up to 50 kV, 1 - 10 mA. The High-Voltage Test-Set HVTS 5010 mainly consists of a high-voltage transformer and a control unit. A motor-driven variac generates the primary voltage of the high-voltage transformer. The output voltage can be selected from 2.0 to 50 kV with a voltage rise adjustable from 3 kV/sec to 50 kV/sec. The maximum output current is 10 mA. The output voltage is measured by a built-in capacitive voltage divider.
