Products
- Frequency Range:
- 50kHz - 108MHz for AC / DC LISN
- 50kHz - 30MHz with Monopole Antenna (CISPR 25)
- 30MHz - 1GHz (10MHz steps)
- 1 - 6GHz (100MHz steps)
- Frequency step:
- 50/500 kHz switchable for AC / DC LISN and Monopole Antenna
- 10MHz for 30MHz - 1GHz
- 100MHz step for 1 - 6GHz
- Includes: Generator, Charger, Storage case
- Connector to DuT: 6 mm wing terminal including 4 mm banana jack
- 150 kHz to 30 MHz
- 220pF + 510 Ω RC Circuit
- CISPR 16-1-2
Pyramidal standard gain horn Antenna optimized for far-field gain
- 8 - 18 GHz
- 20 dBi Gain
Pyramidal standard gain horn Antenna optimized for gain at 1 meter
- 40 - 67 GHz
- 15 - 18.5 dBi Gain
- Acc. to CISPR 25 Ed. 4 or BMW GS 95025-1
- impedance (5µH) || 50 Ohm
- 70 A, 1000 V (DC)
- Backside with built-in 0.1 microfarad capacitor to ground
- N-jack
- Conducted common mode immunity testing according to IEC 61000-4-6
- Complies with CISPR 16-1-2
- can be used for both emission and immunity testing
Diode Pulse Limiter with built-in 10 dB high power attenuator and fuse lamp to protect sensitive measuring equipment when measuring spectra with high energy. Thanks to the built-in fuse lamp, serious overload situations of sensitive equipment can be recognized fast and reliably. A replacement bulb is placed inside the unit. The pulse limiter prevents expensive equipment defects. The very flat frequency response allows high measurement accuracy, even if only a few sample values are used for correction.
Diode Pulse Limiter with built-in 20 dB high power attenuator and fuse lamp to protect sensitive measuring equipment when measuring spectra with high energy. Thanks to the built-in fuse lamp, serious overload situations of sensitive equipment can be recognized fast and reliably. A replacement bulb is placed inside the unit. The pulse limiter prevents expensive equipment defects. The very flat frequency response allows high measurement accuracy, even if only a few sample values are used for correction.
The broadband horn antenna BBHA 9120 E is a linear polarized double ridged horn antenna
- (0.8) 1 GHz to 6 GHz
- N - female
The Multiple Control Device NCD is suited for the operation of optionally up to 8 devices with multiple axis of motion. Those devices can be any combinations of antenna masts, turntables, cable guide rails or any other positioning equipment.
This controller NCD permits the operation in manual, semi-automatic and remote-control mode via IEEE 488.2 (GPIB bus), or optionally other interfaces, of multiple devices simultaneously.
