Products
The Absolute EMC105 series of cables is a very high-performing Coax operating up to 26.5GHz with incredibly low losses. It can be used for high-power applications resulting in more power reaching your antenna. Also ideal for emissions testing up to 18GHz. allowing for long-distance runs with less loss.
The dAV series includes not only the digital, optical transmission of camera signals (dAV-C), it can also transmit analog audio and/or video signals uni- or bidirectionally. Fields of application are e.g. the acoustical monitoring of engine speed or surveillance of an audio or video system in immunity tests. The main unit dAV is thus equipped with different options. The dimensions of the housing depends on the options chosen.
The EPS Test Table is a simple, inexpensive solution for your EMI testing. It is made from durable, expanded polystyrene (EPS) material and can be customized to your requirements. Complies with CISPR, ISO, & IEC requirements for having a low permittivity and can be used for additional standards.
- High strength EPS 3lb per ft3
- Low Permittivity >1.04
- Made for high loading 500 lb.
- Options
- vinyl topper with your company logo (shown in picture)
- epoxy coating for the top (can be combined with vinyl)
The optoLAN-100-MAX system can be used for the optical transmission of Ethernet (LAN-) signals with a data rate of up to 100Mbit/s (100BaseTx). The two identical transceivers are supplied by internal batteries and connected with an optical fiber. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests. The device is not downward compatible to 10BaseT. If you need this option you can get the optoLAN-Gb.
For EMC tests according to the standard IEC/ EN 61000-4-16, -19 and IEC/ EN 61543
- Common Mode & Differential Mode
- Power module with 5A / 250 W or 16A / 800 W
- Signal generator with DC, sine, triangle, and square waveforms
- The external source can be added to the internal signal
- Windows Application software, USB port
The Absolute Coax series of cables are designed specifically to meet the requirements for EMC testing. Each industry has requirements that are unique. EMC is no different. Absolute EMC has gone through the selection process to only offer the best performance quality and value. Taking away the need to spend hours searching and looking through specs and manufacturers to find what you hope is the best value. 4 options are available fitting most EMC applications.
- Vertikal Active Rod Antenna
- 9 kHz - 30 MHz
- BNC
- reduced noise floor
- with mounting nut for AM 9144 and rechargeable battery
- Meeting requirements of MIL-STD-461, CISPR 25, and others
The compact magnetic field generator and analyzer MGA 1033 allows susceptibility tests against magnetic fields from DC to 250 kHz according to the standard EN 55103-2 and their measurement according to EN 55103-1. In addition, EMC tests are possible according to various standards such as automotive, avionic and MIL-STD.; Generation of magnetic fields from DC to 250 kHz; Field strength up to 1000 A/m; EN 55103-1/2, MIL-STD 461, Automotive etc.; Accessories: Loop sensors, Helmholtz coils etc.;
The optoLAN 100/1000Base-T1-BCM89887 is a bidirectional optical transmission system for automotive Ethernet 1000Base-T1 and 100Base-T1 signals. Featuring Rosenberger HSD (Z-coded) connectors, optical transmission, and a shielded case, it ensures reliable, interference-free performance for EMI and EME testing, proven in automotive EMC labs. (picture to be updated)
The optoLAN-BCM89811 system can be used for the optical transmission of automotive ethernet signals with Broadcom© BCM89811© and other 100BaseT1 chipsets. There are two setups available, T1 to T1 (standard) or T1 to Tx (with integrated media converter => optoLAN-BCM89811 -MC), see separate setup document. The standard connector is Rosenberger HSD (Z-coded).
