optoLAN 100Base-T1 BCM89811 Optical Link for Automotive Ethernet

The optoLAN 100Base-T1 BCM89811 system is specifically designed for EMC testing of devices utilizing the Broadcom BCM89811 Ethernet physical layer transceiver (PHY). This cutting-edge solution ensures reliable optical transmission, making it ideal for high-performance EMI and EME test environments.

Key Features:

1. Optimized for EMC Testing:

   • Fully compatible with devices using the Broadcom BCM89811 chipset.
   • Designed to provide reliable performance in electromagnetic compatibility (EMC) testing scenarios.

2. High-Quality Connector:

   • Equipped with a 4-pole Rosenberger HSD connector, minimizing emissions from the optical link.

3. Rugged and Reliable Design:

   • Features a robust shielded case to protect against interference.
   • Optical transmission ensures interference-free and precise data communication.

Applications:
The optoLAN 100Base-T1 BCM89811 system is a versatile and dependable solution for EMC testing in automotive, industrial, and other high-performance applications requiring robust and interference-free Ethernet communication.

With its high-quality construction and tailored compatibility for the Broadcom BCM89811, the optoLAN system delivers exceptional performance and reliability in EMI and EME testing environments.

   Go to our quick guide for all mk messtechnik fiberoptic links

A Quoted kit will consist of the following configuration:

• optical link for 100Base-T1 automotive ethernet signals with Broadcom BCM89811 chipset

2x optoLAN 100Base-T1 BCM89811 Transceiver

• optical transceiver for automotive Eth. (100BaseT1) with chipset Broadcom BCM89811
• transceiver is compatible with other optoLAN 100Base-T1 transceivers on the fiber side
• termination setup: according to Open Alliance standard
• BRReach connector: Rosenberger HSD => use adapter cable
• optical connector: 2x FSMA
• integrated NiMH batteries: 5 cells, 6 V/4 Ah
• battery run time: >10h
• charge connector: female 5 pole Binder 712 (prepared for external supply)
• shielded aluminum housing
• setup: 100BaseT1 => 100BaseT1 (standard); integrated media converter on request
• Optional available external power supplies - prices on request:
  • BP60-5f (4 Ah shielded battery pack to power optical device inside ALC) OR
  • BP60-5f/10Ah (10 Ah shielded battery pack to power optical device inside ALC)
  • SC-30-5m5m (shielded connection cable)
  • PS75-5m (standard non-shielded wall plug power supply to be used outside ALC)

1x LWL-2-20m-[FSMA]-OM1_625-[FSMA]

• duplex optical fiber, cable type: OM1, multimode, 62,5/125 μm
• connector side 1: 2x FSMA male (metal), connector side 2: 2x FSMA male (metal)
• total length: 20 m

2x CH-1-5m standard plug-in charger

• number of cells: 4 .. 10 NiMH/NiCd cells up to 5 Ah
• AC-input: 100-240 V, charge current: 600-800 mA, charge connector: 5 pole male
• ***AC-plug: Type A (US), others on request
• NEW!!! Push pull option for devices (PP12) 
  • optional push pull 12 mm power connector for devices
    • includes:
    • 12 mm push pull connector devices (all devices per set)
    • 12 mm push pull connector for chargers (all chargers or power supplies per set)

 Adapter Cables All will be Quote only ones you need can be select

1x STPC-200cm-[HSD-Z_female]-DACAR647-4-[open]

• shielded twisted pair adapter cable for our optoLAN 100BaseT1 and 1000BaseT1
• interfaces to connect to your DUT
• This adapter cable is ONLY meant for lab use
• cable type: Leoni DACAR 647-4
  • connector side 1: HSD Z female
  • connector side 2: open
• total length: 200cm
  • HSD => open end
  • HSD 1 (BR_P) => open (white)
  • HSD 2 => NC
  • HSD 3 (BR_N) => open (green)
  • HSD 4 => NC
  • shield
• The strain relief is not the same grade as an original cable; you should NOT pull at the cable but at the crimped plug!
  other lengths and cables on request

1x UTPC-200cm-[HSD-Z_female]-Krocar64996795-[open]

• customized unshielded twisted pair adapter cable for our optoLAN 100BaseT1 and 1000BaseT1 interfaces
• This adapter cable is ONLY meant for lab use
• cable type: Kromberg & Schubert FLKCuMgU9Y-9Y (KROCAR 64996795)
  • connector side 1: HSD Z female
  • connector side 2: opentotal
• length: 200 cm
  • HSD => open end
  • HSD 1 (BR_P) => open (white)
  • HSD 2 => NC
  • HSD 3 (BR_N) => open (green)
  • HSD 4 => NC
• The strain relief is not the same grade as an original cable; you should NOT pull at the cable but at the crimped plug!
• other lengths and cables on request

1x UTPC-50cm-[HSD-Z_female]-Krocar64996795-[SUB-D9_female]

• customized unshielded twisted pair adapter cable for our optoLAN 100BaseT1 and 1000BaseT1 interfaces
• This adapter cable is ONLY meant for lab (control room) use
• cable type: Kromberg & Schubert FLKCuMgU9Y-9Y (KROCAR 64996795)
  • connector side 1: HSD Z female
  • connector side 2: SUB-D9 female (metal)
• total length: 50 cm
  • standard pinout compatible e.g. with Vector VN5640 (channel 1):
  • HSD => SUB-D9
  • HSD 1 (BR_P) => SUB-D9f Pin 4
  • HSD 2 => NC
  • HSD 3 (BR_N) => SUB-D9f Pin 5
  • HSD 4 => NC
• The strain relief is not the same grade as an original cable; you should NOT pull at the cable but at the crimped plug!
• other lengths and cables on request

1x UTPC_VN5xxx-50cm-[HSD-Z_female]-Krocar64996795-[ix40_male]

• customized unshielded twisted pair adapter cable for our optoLAN 100BaseT1 and 1000BaseT1 interfaces
• This adapter cable is ONLY meant for lab (control room) use
• cable type: Kromberg & Schubert FLKCuMgU9Y-9Y (KROCAR 64996795)
  • connector side 1: HSD-Z female
  • connector side 2: ix40 (male)
• total length: 50cm
• pinout compatible e.g. with Vector VN5640, VN5650 (ix40 channel 1):
  • HSD => ix40
  • HSD 1 (BR_P) => 6
  • HSD 2 => NC
  • HSD 3 (BR_N)=> 7
  • HSD 4 => NC
• The strain relief is not the same grade as an original cable; you should NOT pull at the cable but at the crimped plug!
• other lengths and cables on request
  => please verify pinout!