Products
- 1-18GHz Frequency Range
- Compensation long cable loss for EMI Measurement
- Improve system noise floor flatness
- High EMI performance
- High linearity LNA for EMI measurement
- High dynamic range
- Unconditionally Stable
- State-of-the-Art Technology
ECAT Lightning Test System (L TS) I s a modular test platform which tests the lightning simulator requirements of RTCA DO-160. Sections 22, and 17 The system is expandable to meet MILSTD-461G-CS117, Boeing. Airbus, EUROCAE and other avionic standards.
- Safe / Quick Test Set-up
- Simple user interface
- Waveforms. 1, 2, 3, 4, 5A, 5B, 6, & voltage spikes
- Levels 1, 2, 3, 4, and 5+
- Single Stroke, Multiple Stroke, Multiple Burst and Pin Injections from the same front panel
- Modular architecture
- Voltage spikes
FPP2.3-m Manual Field Probe Positioner
- Allows for field probe placement according to EN61000-4-3 and IEC61000-4-3.
- Used for uniform field calibration
- Load: 3.0 kg
DYN 8WD I-30t Dynamometer - Integrated into TT 16.0-30t-DYN Turntable
- 30,000kg capacity
- Adjustable axle length and width
- 120k/hr max speed dynamometer
- Turntable rotational speed: 0.1 rpm – 0.5 rpm
Free-standing turntable for anechoic Chambers.
- Diameter 0.8 m
- Load capability 100 kg
- Height 190 mm
Other diameters and load capabilities are available on request.
Free-standing turntable for anechoic Chambers.
- Diameter 0.3 m
- Load capability 50 kg
- Height 190 mm
Other diameters and load capabilities are available on request.
Free-standing turntable for anechoic Chambers.
- Diameter 1.2 m
- Load capability 300 kg
- Height 140 mm
Other diameters and load capabilities are available on request.
Free-standing turntable for anechoic Chambers.
- Diameter 1.5 m
- Load capability 500 kg
- Height 140 mm
Other diameters and load capabilities are available on request.
Free-standing turntable for anechoic Chambers.
- Diameter 2.0 m
- Load capability 500 kg
- Height 140 mm
Other diameters and load capabilities are available on request.
The turntable TT 1.2 SI is specially designed for flush-mounted installation in semi-anechoic electromagnetic absorption chambers. The carrier plate is made of stainless steel.
A 285 mm diameter opening in the turntable's center allows the insertion of a power supply for testing.
The LAN (TCP/IP) - interface provides an additional control option for all functions when operated with the FCU3.0 or NCD Controller
Other diameters and load capabilities are available on request.
