Turntable TT 0.8 PF

The turntable TT 0.8 PF is specially designed for freestanding installation on the surface floor in electromagnetic absorption chambers.
The carrier plate is made of integral skin foam sheets made of rigid PVC.
A 50 mm diameter opening in the center of the turntable provides the capability to insert power supply for testing.
The LAN (TCP/IP) - interface provides an additional control option for all functions, when operated with the FCU3.0 or NCD Controller.

Technical data:
Diameter	0.8 m
Load capability	100 kg
Height	190 mm
Material cover plate	Integral skin-foam sheets made of PVC
Rotating speed adjustable	0.1 rpm – 2.5 rpm
Positioning accuracy	+/- 0.5°
Rotating angle	-200° to 400°
Motor	Synchronous servo motor
Turntable drive	Toothed belt and worm gear
Elevation tolerance	< 3 mm
Voltage	110 VAC – 230 VAC; 50 Hz / 60 Hz; single phase
Current consumption max.	16 A
Required RCD	300 mA
Control cable	Fiber optic lines
Remote control via	LAN (TCP/IP); (IEEE only with NCD)
Interference suppression	20 dB under limits DIN EN 55011:2018-05 class B
Temperature working range	10°C – 35°C
Total weight	approx. 25 kg
Accessories	Service manual 3 m power supply cable
Controller	FCU3.0 or NCD Controller

Controller types

	NCD^3.0	FCU^3.0	FCU^3.0S	FCU^3.0S-LITE
Picture
# of Devices	8	4	1	1 (one axis)
Display	5.7" touch	No	No	No
HSU^3.0	Included	Included	Included	Included
Software	mcApp	mcApp	mcApp	mcApp-Lite
Interface	IEEE 488.2, LAN, (option:USB,RS232,..)	LAN	LAN	LAN

Brief description

The turntable TT 0.8 PF is especially designed for freestanding installation on surface floor in electromagnetic absorption chambers. The carrier plate is made of integral skin-foam sheets made of rigid PVC. A 50 mm diameter opening in the center of the turntable provides the capability to insert power supply for testing. The LAN (TCP/IP) - interface provides an additional control option for all functions, when operated with the FCU3.0 or NCD Controller.

OTHER PRODUCTS IN THE SAME CATEGORY: