Standards

Products

CG 10L10100R, 10 kHz - 100MHz, 10/500kHz 10MHz/100MHz Steps, Conducted & Radiated Comb Generator

  • Frequency Range: 
    • 10kHz - 108MHz for AC / DC LISN
    • 10MHz / 100MHz - 7.5GHz for RE
  • Frequency step: 
    • 10/500 kHz switchable for AC / DC LISN
    • 10MHz / 100MHz step switchable for RE
  • Includes: Generator, antenna, charger, wood case

CG 20H10/500 Conducted Comb Generator, 20Hz/30MHz, 20Hz/500kHz Steps

  • Frequency Range: 

    • Band 1:  20Hz - 10kHz

    • Band 2: 10kHz - 1MHz
    • Band 3: 1MHz - 30MHz
  • Frequency step:
    • Band 1:  20Hz/step
    • Band 2: 10kHz/step
    • Band 3: 500kHz/step
  • Includes: Generator, USB Cable, charger, storage box

CG-100L10100R, 100 kHz - 7.5GHz, 100/500kHz & 10MHz/100MHz Steps, Conducted & Radiated Comb Generato

  • Frequency Range: 
    • 100kHz - 400MHz for AC / DC LISN
    • 10MHz/100MHz - 7.5GHz
  • Frequency step: 
    • 100/500 kHz switchable for AC / DC LISN and Monopole Antenna
    • 10MHz/100MHz switchable for RE
  • Includes: Generator, Charger, Storage case

CG-50LR10100R, 50 kHz - 6GHz, 50/500kHz 10MHz/100MHz Steps, Conducted & Radiated Comb Generator (Dup

  • Frequency Range: 
    • 50kHz - 108MHz for AC / DC LISN
    • 50kHz - 30MHz with Monopole Antenna (CISPR 25)
    • 30MHz - 1GHz (10MHz steps)
    • 1 - 6GHz (100MHz steps)
  • Frequency step: 
    • 50/500 kHz switchable for AC / DC LISN and Monopole Antenna
    • 10MHz for 30MHz - 1GHz
    • 100MHz step for 1 - 6GHz
  • Includes: Generator, Charger, Storage case

Artificial Hand

  • Connector to DuT: 6 mm wing terminal including 4 mm banana jack
  • 150 kHz to 30 MHz
  • 220pF + 510 Ω RC Circuit
  • CISPR 16-1-2

HVTS 30-20 & HVTS 30-40, 30 kV, High Voltage AC Test Set

The High-Voltage Test-Set HVTS 30-20/ 30-40 is designed for high-voltage testing of the electrical insulation of electrical equipment and electrical systems. Test voltage adjustable up to 30 kV, 1-20 mA/ 1-40mA. The High-Voltage Test-Set HVTS mainly consists of a high-voltage transformer and a control and display unit. The primary voltage of the high-voltage transformer is generated by a motor-driven variac. The output voltage can be selected from 0.2 to 30 kV with a voltage rise adjustable from 0,4 kV/sec to 30 kV/sec.

FMZB 1513-60 Active Receiving Loop Antenna

FMZB 1513-60  Active Receiving Loop Antenna

  • 9 kHz - 30 MHz
  • Loop Diameter 600 mm
  • Type N (female) 
  • Case sold as an option

TBPS01 EMC NEAR-FIELD PROBES + TBWA2/40dB WIDEBAND AMPLIFIER

The H20, H10, H5, and E5 are magnetic field (H) and electric field (E) probes for radiated emissions EMC pre-compliance measurements. The probes are used in the near field of sources of electromagnetic radiation. They serve to locate and identify potential sources of interference within the building blocks of electronic assemblies. The probes act similar to wide bandwidth antennas, picking up radiated emissions from components, PCB traces, housing openings or gaps and from any other parts that could be emitting RF. The probes are usually connected to a spectrum analyzer. Scanning the probe over the surface of a PCB assembly or housing quickly identifies locations which emit electromagnetic radiation. By changing to a probe with a smaller size, the origination of the emissions can be further narrowed down. With TBWA2 WIDEBAND AMPLIFIER/40DB

EMCL- NW 10 / MN-1 EM Clamp Matching Network

EMCL- NW 10 / MN-1 Matching Network • For use with the EMCL-20 in the frequency range 10 kHz – 150 kHz • For use with the CDN BCI-P1 in the frequency range 10 kHz – 150 kHz

VUSLP 9111 F - 65 - 4000 MHz, Log Periodic Antenna

The VUSLP 9111 F is a demountable log-periodic antenna 

  • 75 - 4000 MHz
  • 1 kW
  • Type N (female) 


Loading...