Products
ECAT Lightning Test System (L TS) I s a modular test platform which tests the lightning simulator requirements of RTCA DO-160. Sections 22, and 17 The system is expandable to meet MILSTD-461G-CS117, Boeing. Airbus, EUROCAE and other avionic standards.
- Safe / Quick Test Set-up
- Simple user interface
- Waveforms. 1, 2, 3, 4, 5A, 5B, 6, & voltage spikes
- Levels 1, 2, 3, 4, and 5+
- Single Stroke, Multiple Stroke, Multiple Burst and Pin Injections from the same front panel
- Modular architecture
- Voltage spikes
FPP2.3-m Manual Field Probe Positioner
- Allows for field probe placement according to EN61000-4-3 and IEC61000-4-3.
- Used for uniform field calibration
- Load: 3.0 kg
DYN 8WD I-30t Dynamometer - Integrated into TT 16.0-30t-DYN Turntable
- 30,000kg capacity
- Adjustable axle length and width
- 120k/hr max speed dynamometer
- Turntable rotational speed: 0.1 rpm – 0.5 rpm
Free-standing turntable for anechoic Chambers.
- Diameter 0.8 m
- Load capability 100 kg
- Height 190 mm
Other diameters and load capabilities are available on request.
Free-standing turntable for anechoic Chambers.
- Diameter 0.3 m
- Load capability 50 kg
- Height 190 mm
Other diameters and load capabilities are available on request.
Free-standing turntable for anechoic Chambers.
- Diameter 1.2 m
- Load capability 300 kg
- Height 140 mm
Other diameters and load capabilities are available on request.
Free-standing turntable for anechoic Chambers.
- Diameter 1.5 m
- Load capability 500 kg
- Height 140 mm
Other diameters and load capabilities are available on request.
Free-standing turntable for anechoic Chambers.
- Diameter 2.0 m
- Load capability 500 kg
- Height 140 mm
Other diameters and load capabilities are available on request.
The turntable TT 1.2 SI is specially designed for flush-mounted installation in semi-anechoic electromagnetic absorption chambers. The carrier plate is made of stainless steel.
A 285 mm diameter opening in the turntable's center allows the insertion of a power supply for testing.
The LAN (TCP/IP) - interface provides an additional control option for all functions when operated with the FCU3.0 or NCD Controller
Other diameters and load capabilities are available on request.
The turntable TT 2.0 WI is especially for installation in fully anechoic electromagnetic absorption chambers. The carrier plate is made of waterproof, laminated and lacquered wood. There is a division plate between the wooden plates, which can be covered with ferrite tiles in order that there are no metal parts above the ground plane.
Other diameters and load capabilities are available on request.
