ABSOLUTE EMC TP-Ball Head For Tripod or Monopole

The ABSOLUTE EMC TP-Ball Head is designed to mount a camera or other lightweight item with complete position control. Constructed of PLA plastic, only the 1/4"-20 screw is metal. This rugged adaptor is a good match with the ABSOLUTE EMC Tripod or monopole. 

Data Sheet

Accessories Diagram

SPECIFICATIONS

   

ABSOLUTE EMC TP-Ball Head

The original ABSOLUTE EMC MP-Probe Stand is explicitly designed for the EMC market. A low-cost and easy-to-use probe stand with no metallic parts. The EMC Monopole Probe Stand is easy to assemble. It is fully adjustable in height with the center mast section. Materials used are low permittivity allowing for use in most EMC applications to hold antennas, cameras, RF field probes, cables off the floor, and other support possibilities. No metal is used in any part of the stand. The field probe holders use PTEG plastic screws to hold the probe in place. The MP Probe Stand design allows for a small footprint for easy maneuvering around and reduces tripping caused by tripods. If any plastic pieces break, they will be replaced free of charge for the product's life.

 

The EMC Monopole is 3D Printed with PLA plastic and uses 1" hardwood dowels for the structure. The kit includes the (1x) MP-Section, (1x) MP-Extension, (1x) MP-Base, (4x) MP-Probe Adaptor, (1x) MP- Ballast Bag, (1x) TP-Leveling Bubble, and (7x) 1" Hardwood dowels 3 ft long. Or you can choose to purchase pieces and build the antenna monopole yourself. Any 1" wood dowel can be used with the system. 3 ft dowels are standard with a complete kit order. Dowels are available at most lumberyards. Dowels can be cut down for a shorter height, or longer lengths can be purchased for an application where more height is needed.  

 

**All 3D Printed products from Absolute EMC come with an unlimited warranty. If any items become worn out or become damaged, we will replace them free of charge

 

 

 

 Specifications:

Material:

Plastic PLA (Polylactic acid)

Relative Permittivity:

εr = ~2.0 – 3

Loading weight:

~4 lb. *

 

 

Color:

Gray, Green, and purple Other colors are available on request

Camera Mounting:

¼" – 20 screw thread

Size with 3-foot dowels

 

non-slip pad for camera attachment

Hight:

3.5" – 7.25" (8.5 – 19 cm)

Mounting:

fits on 1" wood Dowel or tube

 

 

Included:

Ball Head, Handel, a Ball head tensioning bolt, and 2 dowels mentioning bolts 

 

*Use good engineering judgment for weight loading. It is not designed for heavy antennas/loads or where the center of gravity is overhanging from the center. 

 

 


 

 

 

 

 

 

OTHER PRODUCTS IN THE SAME CATEGORY:
Loading...