Standards

• See EMI instantly with real-time 150 kHz–6 GHz emissions mapping
• Pinpoint noise sources fast using a dense 1,218-probe near-field array
• No external instruments required — integrated spectrum analyzer built in
• Validate fixes in seconds, not hours or days
• Cut compliance risk and testing time with bench-top pre-compliance diagnostics

The CDG 7000-E is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields - including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, a 3-channel RF voltmeter, and a directional coupler at a very affordable price. Use an external Amplifier you already have or one that matches your application. 

• The compact device comprises an RF signal generator, a 3-channel RF voltmeter, and a directional coupler.
• Frequency range of the generator/power meter (4 kHz): 9 kHz – 1200 MHz
• The frequency range of the directional coupler: 10 kHz – 1000 MHz, 200 W 
• Depending on ext. amplifier:  IEC/EN 61000-4-6, IEC 60601-1-2 Ed. 4.1,  IEC 61000-4-39, MIL 461 CS 114, ISO 11452-4, ...

PEFT 8010 

• EFT/Burst
• Up to 7.3kV (6.6kV at CDN)
• CDN: 264V-AC 16-440Hz, 125V-DC
• CDN: 16A-AC @ 50-60Hz, 10A-AC @ 400Hz, 16A-DC

The EPS Test Table is a simple, inexpensive solution for your EMI testing. It is made from durable, expanded polystyrene (EPS) material and can be customized to your requirements. Complies with CISPR, ISO, & IEC requirements for having a low permittivity and can be used for additional standards.

• High strength EPS 3lb per ft³
• Low Permittivity >1.04
• Made for high loading 500 lb.
• Options
• vinyl topper with your company logo (shown in picture)
• epoxy coating for the top (can be combined with vinyl)

TRILOG Broadband Antenna, Combination antenna, Bicon+Log

• 30 MHz to 7 GHz
• 100 Watts
• Ideal Broadband antenna for Emissions measurements to CISPR 16 and many others

The broadband horn antenna BBHA 9120 D is a linear polarized double ridged horn antenna.

• (0.8) 1 GHz to 18 GHz
• N - female

For EMC tests according to the standard IEC/ EN 61000-4-16, -19 and IEC/ EN 61543

• Common Mode & Differential Mode
• Power module with 5A / 250 W or 16A / 800 W
• Signal generator with DC, sine, triangle, and square waveforms
• The external source can be added to the internal signal
• Windows Application software, USB port

The compact magnetic field generator and analyzer MGA 1033 allows susceptibility tests against magnetic fields from DC to 250 kHz according to the standard EN 55103-2 and their measurement according to EN 55103-1. In addition, EMC tests are possible according to various standards such as automotive, avionic and MIL-STD.; Generation of magnetic fields from DC to 250 kHz; Field strength up to 1000 A/m; EN 55103-1/2, MIL-STD 461, Automotive etc.; Accessories: Loop sensors, Helmholtz coils etc.;

The Absolute Coax series of cables are designed specifically to meet the requirements for EMC testing. Each industry has requirements that are unique. EMC is no different. Absolute EMC has gone through the selection process to only offer the best performance quality and value. Taking away the need to spend hours searching and looking through specs and manufacturers to find what you hope is the best value. 4 options are available fitting most EMC applications.

Test System for MIL-STD-641 CS114, CS115, CS116

• Automatic calibration for the whole test frequency range
• Application of all test frequencies automatically. The level can be selected or automatic.
• NO need to manually configure the measurement equipment
• NO need to manually integrate the transfer function of probes and attenuators
• Generation of test reports: NO need to record all values read from the measurement equipment
• Generation of calibration reports: NO need to record all calibration setting parameters
• Rack together and add CS101, CS109, and RS101 (sections 18, 19, and 20 of the RTCA DO-160G are also available.)