Products
- Capability:
- Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines, report generation, and notes.
- Customization of the robot arm size, any size, is possible.
- Spatial scan time:
-
- The scan time depends on size and area
- Ideal for large component boards
- The robotic arm allows for advanced scans on complex items
- Supported operating systems: Windows 10®
- Supported overlays: Picture in JPEG format
- Standard Gerber© RS274x format and HPGL form
Audio Transformer 200W, 50A
- 160x155x200mm
- 2:1 ratio
- 200 W Maximum30Hz - 250 kHz
- 100 W Maximum at15 Hz - 30 Hz
- Insulation Resistance Test - 2kV
- Covers 1–18 GHz with programmable frequency steps
- Delivers flat, stable signals with HI/LO output options
- Sequential signal generation for better dynamic range
- Compatible with spectrum analyzers & EMI receivers
- Battery-powered with 8-hour runtime and USB-C charging
- Includes accredited calibration and supports ISO 17025 compliance
Highlights of the CS116 Damped Sinusoid Generator
- MIL-STD 461 CS115+CS116 Compliant: Meets stringent military testing standards.
- Flexible Frequency Options: Choose from 6, 9, or 17 test frequencies.
- Comprehensive Accessories: Includes injection probe, attenuator, oscilloscope, and control software.
- Efficient Operation: Single signal output reduces test time and supports automation.
- User-Friendly Control: Easily controlled via RS232 and USB interfaces.
- Robust Design: Durable construction with wide power compatibility (90–264 Vac).
Optimize your naval and industrial testing with the CS116 & CS115 Damped Sinusoid & Switch Transient Generator—precision and efficiency combined.
PEFT 8010
- EFT/Burst
- Up to 7.3kV (6.6kV at CDN)
- CDN: 264V-AC 16-440Hz, 125V-DC
- CDN: 16A-AC @ 50-60Hz, 10A-AC @ 400Hz, 16A-DC
- Capability:
- Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines, and report generation.
- Spatial scan time:
- Continuous real-time or sub-second single scan for the entire scan area is dependent on spectrum analyzer performance.
- Spectral scan time:
- 45 seconds for L 10 cm x W 10 cm (L 4” x W 4”) PCB with a 100 MHz span and 100 kHz RBW. Scanning area, span, and RBW are user-selectable within spectrum analyzer specifications
- EMViewer Software
- We recommend you use the EMViewer software for best results. A Yearly subscription or a once-off purchase is available.
- Supported operating systems: Windows 10®
- Supported CAD overlays: Standard Gerber© RS274x format and HPGL format
By Frequency Range
Axos 8 - Compact
- Multi Tester with 16AMP CDN
- EFT/Burst 5kV IEC 61000-4-4
- Surge, Combination Wave 7kV IEC 61000-4-5
- Surge Magnetic field IEC 61000-4-9 (MSURGE-A loop antenna required)
- Ring Wave, 7kV IEC 61000-4-12 & ANSI
- Telicomm Wave, 7kV IEC 61000-4-5 & ITU
- AC Dips/Drops IEC 61000-4-11 (DIP 116 dips transformer required)
- DC Dips/Drops IEC 61000-4-29 (2x DC supplies required)
Axos 5 - Compact
- Multi Tester with 16AMP CDN
- EFT/Burst 5kV IEC 61000-4-4
- Surge, Combination Wave 5kV IEC 61000-4-5
- Surge Magnetic field IEC 61000-4-9 (MSURGE-A loop antenna required)
- AC Dips/Drops IEC 61000-4-11 (DIP 116 dips transformer required)
- DC Dips/Drops IEC 61000-4-29 (2x DC supplies required)
" An RF Probe Kit on Steroids"
- Fully integrated with Y.I.C. Technologies EMViewer software and EMProbe
- Normalization and correction when using the EMViewer software
- Flat response within the range of operation
- Slim Design and Protective Coating
- 18GHz Measured Cable included
- Lectures & Explanation Document
- Designed By Prof. Arturo Mediano, University of Zaragoza, Spain
