Standards

The CDG 7000 is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields - including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, an RF power amplifier, a 3-channel RF voltmeter, and a directional coupler at a very affordable price.

• Capability:
• • Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines, report generation, and notes.
• Spatial scan time:
• • Continuous real-time for the entire scan area (1,218 probes activated) when Level 1 is selected:  5 sec.
  • Selected area 2.25 cm x 2.25 cm, 9 probes activated.
  • Level 1: 
• Spectral scan time:
• • 11 seconds for L 10 cm x W 10 cm (L 4” x W 4”, 178 probes activated) from 10 MHz span to 110 MHz and 122 kHz RBW. Scanning area, span, and RBW are user-selectable within spectrum analyzer specifications
• Supported operating systems: Windows 10®
• Supported overlays: Picture in JPEG format 
• Standard Gerber© RS274x format and HPGL form

Audio Transformer 200W, 50A

• 160x155x200mm
• 2:1 ratio 
• 200 W Maximum30Hz - 250 kHz
• 100 W Maximum at15 Hz - 30 Hz
• Insulation Resistance Test - 2kV

• Protocol reports
• Generation of waveforms with synchronous data acquisition 
• Modular Expandable
• Individual Waveform Generation
• Standard Libraries included
• Unlimited Waveform size
• 2 different Waveforms synchronously 
• DLL's for LabView, Vector CANoe / CAPL, C#, C++, ANSI C, Python, etc.
• Simulation of imported oscilloscope waveform

opto, Fiber-optic, Automotive Link Overview

PGESD 300K DP - Helicopter 300kV ESD Test System

• High Voltage Capability: Generates electrostatic discharges up to 300 kV with reversible polarity.
• Adjustable Electrode: Height adjustable from 1.5 to 6 meters and tilt up to ±60° for precise targeting.
• Standards Compliance: Meets MIL-STD-331, MIL-STD-464, NATO AECTP-250, AECTP-500, and more.
• Automated Operation: PC-based software for remote control, calibration, and test reporting.
• Enhanced Safety: Fiber optic interface ensures operator safety by isolating the control system from high-voltage equipment.
• Versatile Testing: Supports multiple discharge scenarios, including personnel-borne and helicopter-borne ESD tests.
• Durable Design: Built for demanding military and industrial testing environments.

By Frequency Range

• The EPS Test Table Lt is a simple, inexpensive solution for your EMI testing. It is made from durable, expanded polystyrene (EPS) material and can be customized to your requirements. Complies with CISPR, ISO, & IEC requirements for having a low permittivity and can be used for additional standards.
• High strength EPS 3lb per ft3
• Low Permittivity >1.04
• Made for moderate 200 lb.
• Options
• vinyl topper with your company logo 
• epoxy coating for the top (can be combined with vinyl)

• Bidirectional Optical Isolation: 20 m multimode fiber link (62.5/125 µm) for galvanic isolation of Control Pilot, CAN, and auxiliary signals.
• Long Life Battery Power: Internal 8.4 V, 4 Ah NiMH pack delivers up to 10 hours of continuous operation.
• Robust Construction: Anodized aluminum housing with rubber bumpers and grounding lug, rated for CISPR 25 Class 5 environments.
• Versatile Signal Interfaces: BNC connector for Control Pilot plus D SUB 15 female for CAN, temperature sensors, connector lock control, etc.
• Wide Protocol Support: Compatible with CCS, CHAdeMO, and GB/T charging standards for comprehensive EVSE/EV EMC testing.
• Compact & Portable: 140 × 86 × 65 mm enclosure weighing ≈760 g—ideal for on site and laboratory test setups.