Standards

• Ultra-High Voltage Handling – Supports up to 200 kV
• Wideband Frequency Response – Covers DC to 4 GHz
• Precise Signal Attenuation – 54 dB attenuation for accurate measurements
• Low Return Loss – Ensures minimal signal reflection
• Robust & Reliable – Optimized for high-energy pulse testing

The optoK system can be used for the optical transmission of K-Line signals with transmission rates of more than 30kbit/s at supply voltages of up to 24V. It consists of two identical battery supplied transceivers connected to each other with an optical fiber. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.

• Ultra-Wideband Performance – Covers 200 Hz – 10 GHz
• Precise 180° Phase Shift – Ensures accurate signal inversion
• Passive Operation – No power required, high reliability
• High Dynamic Range – Minimal distortion, superior fidelity
• EMI Shielded – Operates in high-field environments (>500 kV/m)
• Compact & Durable – SMA connectors, rugged design

• Broadband Amplification – Covers 80 Hz – 3 GHz
• High Gain Options – 20 dB or 40 dB for signal boosting
• Superior EMI Shielding – Operates in fields >500 kV/m
• Battery-Powered – Up to 27-hour autonomy
• Low Noise Performance – Ensures clean signal amplification
• Rugged & Compact – SMA connectors, lightweight design

• Seamless Impedance Matching – Converts 1 MΩ to 50 Ω for accurate measurements
• Broadband Performance – Covers DC to 650 MHz
• Low-Noise Operation – Shielded design for interference-free signals
• Battery-Powered – 40+ hours autonomy, quick
• Versatile Connectivity – BNC input & SMA output for easy integration

The optoSENT system was developed for the transmission of asynchronous SENT signals (Single Edge Nibble Transfer) and exists in two different versions.

• Automated Oscilloscope Control – Seamless data collection & waveform adjustments
• Advanced Signal Compensation – Real-time correction for accurate measurements
• Multi-Channel Support – Controls multiple oscilloscopes simultaneously
• Time & Frequency Domain Analysis – Deep signal insight for precise testing
• User-Friendly Interface – Intuitive setup, measurement logging & export
• Lifetime License – One-time purchase, no recurring fees

The broadband horn antenna BBHA 9120 C is a linear polarized double ridged horn antenna.

• 2 GHz to 18 (20) GHz
• SMA - female

The STLP 9128 E special is nearly identical like the STLP 9120 E but with folded longest elements and smaller structure angle.

• 80 - 1700(2700) MHz
• Type N (female) or Type 7/16 (female)

The original ABSOLUTE EMC MP-Probe Stand is explicitly designed for the EMC market. A low-cost and easy-to-use probe stand with no metallic parts. The EMC Monopole Probe Stand is easy to assemble. It is fully adjustable in height with the center mast section. Materials used are low permittivity allowing for use in most EMC applications to hold antennas, cameras, RF field probes, cables off the floor, and other support possibilities. No metal is used in any part of the stand. The field probe holders use PTEG plastic screws to hold the probe in place. The MP Probe Stand design allows for a small footprint for easy maneuvering around and reduces tripping caused by tripods. If any plastic pieces break, they will be replaced free of charge for the product's life.