Products
- Vertikal Active Rod Antenna
- 9 kHz - 30 MHz
- BNC
- reduced noise floor
- with mounting nut for AM 9144 and rechargeable battery
- Meeting requirements of MIL-STD-461, CISPR 25, and others
The Absolute Coax series of cables are designed specifically to meet the requirements for EMC testing. Each industry has requirements that are unique. EMC is no different. Absolute EMC has gone through the selection process to only offer the best performance quality and value. Taking away the need to spend hours searching and looking through specs and manufacturers to find what you hope is the best value. 4 options are available fitting most EMC applications.
Test System for MIL-STD-641 CS114, CS115, CS116
- Automatic calibration for the whole test frequency range
- Application of all test frequencies automatically. The level can be selected or automatic.
- NO need to manually configure the measurement equipment
- NO need to manually integrate the transfer function of probes and attenuators
- Generation of test reports: NO need to record all values read from the measurement equipment
- Generation of calibration reports: NO need to record all calibration setting parameters
- Rack together and add CS101, CS109, and RS101 (sections 18, 19, and 20 of the RTCA DO-160G are also available.)
The optoCAN-FD system can be used for the bidirectional optical transmission of CAN-signals with transmission rates of up to 10 Mbit/s. It consists of two identical battery supplied transceivers connected to each other with an optical fiber. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.
- Technologically advanced, fast-switching, compact 19-inch power supplies
- High control dynamics in the 100...200 µs range – even at higher power levels
- Exceptional current accuracy of <0.02% FS, additional high-resolution current measurement range included as standard
- Full power regeneration and a high degree of efficiency, resulting in a significant reduction of energy consumption and heat dissipation, low acoustic noise
- Wide current-voltage range with an auto-ranging factor of 3
- Full digital CV, CC, CP, CR, and Ri-Sim control modes
- Technologically advanced, fast-switching, compact 19-inch power supplies
- High control dynamics in the 100...200 µs range – even at higher power levels
- Exceptional current accuracy of <0.02% FS, additional high-resolution current measurement range included as standard
- Full power regeneration and a high degree of efficiency, resulting in a significant reduction of energy consumption and heat dissipation, low acoustic noise
- Wide current-voltage range with an auto-ranging factor of 3
- Full digital CV, CC, CP, CR, and Ri-Sim control modes
- Technologically advanced, fast-switching, compact 19-inch power supplies
- High control dynamics in the 100...200 µs range – even at higher power levels
- Exceptional current accuracy of <0.02% FS, additional high-resolution current measurement range included as standard
- Full power regeneration and a high degree of efficiency, resulting in a significant reduction of energy consumption and heat dissipation, low acoustic noise
- Wide current-voltage range with an auto-ranging factor of 3
- Full digital CV, CC, CP, CR, and Ri-Sim control modes
- Technologically advanced, fast-switching, compact 19-inch power supplies
- High control dynamics in the 100...200 µs range – even at higher power levels
- Exceptional current accuracy of <0.02% FS, additional high-resolution current measurement range included as standard
- Full power regeneration and a high degree of efficiency, resulting in a significant reduction of energy consumption and heat dissipation, low acoustic noise
- Wide current-voltage range with an auto-ranging factor of 3
- Full digital CV, CC, CP, CR, and Ri-Sim control modes
The optoLAN 100/1000Base-T1-BCM89887 is a bidirectional optical transmission system for automotive Ethernet 1000Base-T1 and 100Base-T1 signals. Featuring Rosenberger HSD (Z-coded) connectors, optical transmission, and a shielded case, it ensures reliable, interference-free performance for EMI and EME testing, proven in automotive EMC labs. (picture to be updated)
The Wood Test Table is a simple, inexpensive solution for your EMC testing. The table is built to be ship flattened to reduce shipping costs and easily assembled on site quickly. The picture is shown with a ground plane.
