Standards

Products

EMSCOPE-RX2, 9kHz - 110MHz, 2 channel Receiver

EMI Measurements:

  • FFT-based dual-channel receiver
  • According to CISPR16-1-1
  • Peak, Quasi-Peak, and Average Detectors
  • Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
  • The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)

PG-CS115 - CS115 Test Generator, 1kV into 50 Ohms

Benefits of the PG-CS115 Pulse Generator

  • MIL-STD 461 Compliant: Meets stringent military standards for reliable testing.
  • Flexible Configurations: Available as standalone (PG-CS115) or modular (M-CS115) units.
  • Comprehensive Accessories: Optional injection probe, attenuator, oscilloscope, and control software.
  • High Precision: Delivers accurate rectangular pulses with rapid rise/fall times (≤ 2 ns).
  • Versatile Testing: Supports single and repetitive pulse rates from 1 to 50 Hz.
  • Compact Design: Lightweight and portable, ideal for various testing environments.
  • Reliable Performance: Durable construction ensures long-term use in demanding settings.

Enhance your EMC testing with the CS115 Pulse Generator—precision, compliance, and versatility combined.

EMSCOPE-RX4, 9kHz - 110MHz, 4 channel Receiver for 3 phase

EMI Measurements:

  • FFT-based dual-channel receiver
  • According to CISPR16-1-1
  • Peak, Quasi-Peak, and Average Detectors
  • Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
  • The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)
  • Measure 4 lines of 3 phase LISN
  • The picture is shown with internal LISN [EMSCOPE RX4 LZ2]

MOL25T Fiber Optic Link DC - 25 MHz with Divider and Sleep Feature

  • DC to 25 MHz Bandwidth
  • Pulse or CW analog signals
  • Up to 1km Tx/Rx distance
  • Battery Powered

MOL3000 Fiber Optic Link 80 Hz - 3.5 GHz

  • 80Hz to 3.5GHz Bandwidth
  • Pulse or CW analog signals
  • Up to 1km Tx/Rx distance
  • Battery Powered

MOL500T Fiber Optic Link DC - 500 MHz with Divider and Sleep Feature

  • DC to 500 MHz Bandwidth
  • Pulse or CW analog signals
  • Up to 1km Tx/Rx distance
  • Battery Powered

MOL2000T Fiber Optic Link 80 Hz - 3.5 GHz with Gain and sleep feature

  • 80 Hz to 3.5 GHz Bandwidth
  • Pulse or CW analog signals
  • Up to 1 km Tx/Rx distance
  • Battery Powered

Absolute EMC, A-ESD Balancer Support Arm

Support arm with balancer for ESD test station

  • The only support arm is made from non-metal 
    • 1.5" Fiberglass Tubes,
    • 3D Printed: Cage, holder, base
    • Custom ESD simulator adaption
    • Balancer is plastic housing and string (only the spring is metallic)
  • Only the system meets the metal-free area requirements of standards
  • Support arm with the carriage
  • 360 degrees pivotable
  • Customized attachment to the table included

BOLAB ISO 21498 HV Test System & Ripple Generator

  • Advanced Ripple Testing: Meets ISO 21498, LV123, VW 80300, Nissan MES PW 67602, Mazda, and emerging standards.
  • Series Amplifier Integration: High accuracy ripple injection, minimal distortion, and enhanced safety.
  • Waveform Versatility: Sine, square, trapezoidal, pulses, and triangle waveform generation.
  • WaveMaster Software: Fast DUT impedance measurement, automated test sequences, and dynamic voltage/current control.
  • High Power Capability: Ripple Voltage up to 100 Vpp, currents from 100A to 2000A+, and frequency range 10 Hz–300+ kHz.
  • Future-Proof Design: Modular architecture for easy upgrades and adaptation to new standards.

CDG 7000 Conducted Immunity, 10 kHz - 400MHz

The CDG 7000 is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields - including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, an RF power amplifier, a 3-channel RF voltmeter, and a directional coupler at a very affordable price.


Loading...