Products
- The circular transmitting loop antenna
- 0.1 - 100(300) MHz
- diam. 50 mm
- Transformer to 50 Ohms
- BNC Connectors
Discontinued
- The circular transmitting loop antenna
- DC - 5 MHz
- diam. 50 mm
- turns 10
- BNC Connectors
- The circular transmitting loop antenna
- DC - 20 (30) MHz
- diam. 100 mm
- turns 2
- BNC Connectors
- The circular transmitting loop antenna
- DC - 2 MHz
- diam. 180 mm
- turns 10
- BNC Connectors
- The circular transmitting loop antenna
- DC - 400 kHz
- diam. 250 mm
- turns 28
- BNC Connectors
- The circular transmitting loop antenna
- DC - 30 MHz
- diam. 100 mm
- turns 1
- BNC Connectors
- Small biconical microwave antenna
- 0.5 - 3 GHz
- Compliant with CISPR 16-1-4 for site validation above 1 GHz
- Including transport case
- 20 W
The High-Voltage Pulse Generator Type PG 6-401 is designed for dielectric testing of X- and Y-capacitors with standard impulse voltages 1.6/47 µs up to 6 kV acc. to IEC 384-14, etc. The generator has the same principle of operation as the IPG 809 but allows testing capacitance values of 33 nF - 470 nF. Picture: incl. Option PA 503
The pulse generator IPG 250 is designed for measuring the step response of high-impedance networks, for instance voltage dividers, oscilloscope probes etc. The generator excels by calibrated adjustment of output amplitude, short rise time and flat pulse top. The output pulse amplitude can be adjusted by use of a 10-turn potentiometer from 0 to 250 V. Positive and negative polarity can be selected.
The TBCDN-M1 is a Coupling Decoupling Network for conducted immunity testing according to IEC 61000-4-6. The TBCDN-M1 is compliant with IEC 61000-4-6 Annex D2.
