Standards

Products

  •  Vertical passive rod antenna
  • DC - 300 MHz
  • 0.5m rod delivered with the unit
  • possible rods: BBA 9106, BBAL 9136, BBAK 9137, BBVK 9138, FBAL 9177, FBAB 9178, VHA 9103
  • According to CISPR 16-1-6, CISPR 25 Ed4.

  • Biconical VHF-UHF broadband antenna
  • (30) 150 -1000 MHz
  • 5 Watts

  • Biconical UHF broadband antenna
  • (160) 300 -1000 (1100) MHz
  • 5 Watts

  • Small biconical microwave antenna
  • 1 - 6 GHz
  • Compliant with CISPR 16-1-4 for site validation above 1 GHz
  • Including transport case
  • 20 W

  • Small biconical microwave antenna
  • 80 MHz - 3 GHz
  • Compliant with CISPR 16-1-4 for site validation above 1 GHz
  • Including transport case
  • 20 W

  • UBAA 9115 antenna holder/balun in combination with required elements:
    • Biconical Elements: BBVU 9135, BBUK 9139
    • Open-Cone Elements: BAOC 9216, BBOC 9217
  • Extremely high symmetry, 4:1
  • 30 - 1200 MHz, 5 W, RX

  • Frequency Range
  • Conducted Emissions: 50kHz/500kHz ~ 108MHz for DC LISN
  • Radiated Emissions:
  •    50kHz/500kHz ~30MHz for RE with Monopole Antenna
  •    10MHz/100MHz ~1G for RE
  •    100MHz ~6G for RE
  • Frequency steps: 
  • 50kHz/500kHz step switchable for CE & RE with Monopole Antenna
  • 10MHz/100MHz step switchable for RE
  • Includes: Generator, antenna, charger, USB cable, wooden storage box

  • 1-18GHz Frequency Range
  • Compensation long cable loss for EMI Measurement
  • Improve system noise floor flatness
  • High EMI performance
  • High linearity LNA for EMI measurement
  • High dynamic range
  • Unconditionally Stable
  • State-of-the-Art Technology

ECAT Lightning Test System (L TS) I s a modular test platform which tests the lightning simulator requirements of RTCA DO-160. Sections 22, and 17 The system is expandable to meet MILSTD-461G-CS117, Boeing. Airbus, EUROCAE and other avionic standards.

  • Safe / Quick Test Set-up
  • Simple user interface
  • Waveforms. 1, 2, 3, 4, 5A, 5B, 6, & voltage spikes
  • Levels 1, 2, 3, 4, and 5+
  • Single Stroke, Multiple Stroke, Multiple Burst and Pin Injections from the same front panel
  • Modular architecture
  • Voltage spikes

FPP2.3-m Manual Field Probe Positioner 

  • Allows for field probe placement according to EN61000-4-3 and IEC61000-4-3.
  • Used for uniform field calibration
  • Load: 3.0 kg

Loading...