AM 4.0-O Antenna Mast, OATS, 4m

The Antenna Mast AM 4.0-0 

  • Height range 1.0 - 4.0 m 
  • Designed for easy use outside on OATS
  • Electric polarization change 90°
  • Electric stepper motor height
  • Antenna Load: 10 kg (when balanced)

Data Sheet

SPECIFICATIONS

AM 4.0-O Antenna Mast

The Antenna Mast AM 4.0-0 is designed for use in open area test sites. Included guy wires, anchoring pins and protection cover ensure an operation for wind speeds up to 60 km/h. The antenna mast, with the exception of the drive unit, is fabricated from plastic (PVC and reinforced fibreglass). Metal parts are located only in the base plate and the drive mechanism (max. 0.3 m above ground level).

Antenna Adapters for all commercially available antennas are available upon request. All antennas during polarization rotate around their axis to eliminate any elevation errors.

The LAN (TCP/IP) - interface provides an additional control option for all functions, when operated with the FCU   or NCD Controller.

 

Technical data:  
Antenna height automatic adjustable 1.0 m - 4.0 m
Total mast height 4.6 m
Load capability max. 10 kg (when balanced)
For long and heavy antennas, a counterweight is required to balance the load.
Depending on the distance of the antenna gravity center
Material cover plate  Plastic and reinforced fiberglass
Mast cross-section 101 mm x 95 mm
Base L x W 1.3 m x 0.7 m
Position speed adjustable  
   in combination with FCU3.0 1.0 cm/s - 35 cm/s
   in combination with NCD 1.0 cm/s - 20 cm/s
Position accuracy +/- 0.5 cm
  Electric  polarization 0° / 90° (vert. I hor.)
  Polarization time approx. 3 s
Motor  DC stepper Motor
Antenna support drive 2 Toothed belts
Material of toothed belts Kevlar-reinforced (non-metallic)
Voltage 110 VAC - 230 VAC, 50 Hz / 60 Hz single phase
Current consumption max. 16 A
Required RCD 300 mA
Control cable Fiber optic lines
Remote control via LAN (TCP/IP); (IEEE only with NCD)
Interference suppression  20 dB under limits DIN EN 55011:2018-05 class B
Temperature working range  10°C – 35°C
Total weight  approx. 100 kg
Accessories  Service manual
3 m power supply cable
Controller FCU3.0 or NCD Controller

 

Controller Types

  NCD3.0 FCU3.0 FCU3.0S FCU3.0S-LITE
Picture        
# of Devices 8 4 1 1 (one axis)
Display 5.7" touch No No No
HSU3.0 Included
Included 
Included 
Included 
Software mcApp
mcApp
mcApp
mcApp-Lite
Interface IEEE 488.2, LAN,
(option:USB,RS232,..)
LAN LAN  LAN
         

ANTENNA ADAPTER

Antenna Adapters for all commercially available antennas are available upon request. During polarisation, all antennas rotate around their axis to eliminate elevation errors. Please specify what antennas you have.


Mounting Clamping System
Versions Also for HD, Frankonia and Inn-co masts

 



OTHER PRODUCTS IN THE SAME CATEGORY:
Loading...