Standards

Products

BLS SU 600, Matrix Switching Unit

  • Protocol reports
  • Generation of waveforms with synchronous data acquisition 
  • Modular Expandable
  • Individual Waveform Generation
  • Standard Libraries included
  • Unlimited Waveform size
  • 2 different Waveforms synchronously 
  • DLL's for LabView, Vector CANoe / CAPL, C#, C++, ANSI C, Python, etc.
  • Simulation of imported oscilloscope waveform

CABAI20050, 200W, 50 A, 2:1, Audio Isolation Transformer

Audio Transformer 200W, 50A

  • 160x155x200mm
  • 2:1 ratio 
  • 200 W Maximum30Hz - 250 kHz
  • 100 W Maximum at15 Hz - 30 Hz
  • Insulation Resistance Test - 2kV

EMScanner: 150 kHz- 8 GHz, 3.5mm Resolution, EMC desktop scanner

  • Capability:
    • Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines, and report generation.
  • Spatial scan time:
    • Continuous real-time or sub-second single scan for the entire scan area is dependent on spectrum analyzer performance.
  • Spectral scan time:
    • 45 seconds for L 10 cm x W 10 cm (L 4” x W 4”) PCB with a 100 MHz span and 100 kHz RBW. Scanning area, span, and RBW are user-selectable within spectrum analyzer specifications
  • EMViewer Software
    • We recommend you use the EMViewer software for best results.  A Yearly subscription or a once-off purchase is available. 
  • Supported operating systems: Windows 10®
  • Supported CAD overlays: Standard Gerber© RS274x format and HPGL format

POG-CS116-CS115 Test Generator, Dampened Wave and Switch Transients

Highlights of the CS116 Damped Sinusoid Generator

  • MIL-STD 461 CS115+CS116 Compliant: Meets stringent military testing standards.
  • Flexible Frequency Options: Choose from 6, 9, or 17 test frequencies.
  • Comprehensive Accessories: Includes injection probe, attenuator, oscilloscope, and control software.
  • Efficient Operation: Single signal output reduces test time and supports automation.
  • User-Friendly Control: Easily controlled via RS232 and USB interfaces.
  • Robust Design: Durable construction with wide power compatibility (90–264 Vac).

Optimize your naval and industrial testing with the CS116 & CS115 Damped Sinusoid & Switch Transient Generator—precision and efficiency combined.

opto, Fiber-optic, Automotive Link Overview

opto, Fiber-optic, Automotive Link Overview

PGESD 300K DP - Helicopter 300kV ESD Test System

PGESD 300K DP - Helicopter 300kV ESD Test System

  • High Voltage Capability: Generates electrostatic discharges up to 300 kV with reversible polarity.
  • Adjustable Electrode: Height adjustable from 1.5 to 6 meters and tilt up to ±60° for precise targeting.
  • Standards Compliance: Meets MIL-STD-331, MIL-STD-464, NATO AECTP-250, AECTP-500, and more.
  • Automated Operation: PC-based software for remote control, calibration, and test reporting.
  • Enhanced Safety: Fiber optic interface ensures operator safety by isolating the control system from high-voltage equipment.
  • Versatile Testing: Supports multiple discharge scenarios, including personnel-borne and helicopter-borne ESD tests.
  • Durable Design: Built for demanding military and industrial testing environments.

LS Fiber Connector Cleaning Kit

The fiber connector cleaning kit allows for cleansing the fiber optic connector to ensure reliable operation of the LSProbes and other Fiber optic products.

EPS Test Table Lt - low permittivity for high frequency testing

  • The EPS Test Table Lt is a simple, inexpensive solution for your EMI testing. It is made from durable, expanded polystyrene (EPS) material and can be customized to your requirements. Complies with CISPR, ISO, & IEC requirements for having a low permittivity and can be used for additional standards.
  • High strength EPS 3lb per ft3
  • Low Permittivity >1.04
  • Made for moderate 200 lb.
  • Options
    • vinyl topper with your company logo 
    • epoxy coating for the top (can be combined with vinyl)

400 - 6361, 2-Ch, 2.8MS/s, AnyWave Control Unit

WaveMaster + AnyWave

BOLAB WaveMaster software and the BOLAB AnyWave control unit allow the control of power supplies as well as 4 quadrant amplifiers via the analog interfaces.

The powerful and easy-to-use BOLAB WaveMaster software is unique in the world. Without any knowledge in software development, designing ordinary and complex waveforms is very easy. A graphic waveform editor allows the generation

of individual curves in no time. Also, with tabular input, all types of waveforms can be produced instantly.

optoCharger, Fiber-optic Link EV Charger COMM: CCS, CHAdeMO, GB/T

  • Bidirectional Optical Isolation: 20 m multimode fiber link (62.5/125 µm) for galvanic isolation of Control Pilot, CAN, and auxiliary signals.
  • Long Life Battery Power: Internal 8.4 V, 4 Ah NiMH pack delivers up to 10 hours of continuous operation.
  • Robust Construction: Anodized aluminum housing with rubber bumpers and grounding lug, rated for CISPR 25 Class 5 environments.
  • Versatile Signal Interfaces: BNC connector for Control Pilot plus D SUB 15 female for CAN, temperature sensors, connector lock control, etc.
  • Wide Protocol Support: Compatible with CCS, CHAdeMO, and GB/T charging standards for comprehensive EVSE/EV EMC testing.
  • Compact & Portable: 140 × 86 × 65 mm enclosure weighing ≈760 g—ideal for on site and laboratory test setups.

 


Loading...