Products
- For immunity test on small and medium-sized devices
- For immunity tests on automotive devices according to the European directive 2004/104/EC
- Requency Range: 10kHz to 30MHz
Highlights of the PG-CS106 Pulse Generator
- MIL-STD 461F CS106 Compliant: Ensures reliable military-standard testing.
- Flexible Configurations: Available as standalone (PG-CS106) or modular (M-CS106) units.
- High Performance: Delivers up to 500 V peak voltage and 8–100 A peak current.
- Precise Pulse Control: Supports 1–15 Hz repetition rates with swift rise and fall times.
- User-Friendly: Easy computer control via RS232 and USB interfaces.
- Compact & Portable: Lightweight design for both standalone (13 kg) and modular (1.2 kg) setups.
Enhance your naval and industrial testing with the PG-CS106 Pulse Generator—precision, compliance, and versatility in one powerful solution.
- 10kHz to 30MHz
- Adjustable height 1.5 to 3.5m
- Full vehicle testing
- Mil-STD-464 & ISO 11451-2
This generator has been designed as a trigger source for Marx generators and for trigatrons (triggered spark gaps). It can replace the obsolete PT55 trigger generator as mechanical dimensions and attachment points are the same. The advantages of our generator are:
- · Solid-state switch
- · High repetition rate
- · Long lifetime
- · No need of gas
- · No need of external high voltage power supply
- · Can be triggered by a 5 V digital signal or by fiber optic
Broad-Band Horn Antenna
- 15 - 26.5 (40) GHz
- SMA-compatible connector
Stacked Logarithmic-Periodic Broadband Antenna for Linear polarised RX- and TX- applications in the microwave frequency range. The antenna structure is made of laser-cut brass. For the protection of the fine antenna structure against damage, the antenna is equipped with a low loss plastic protection cover. The STLP 9149 is especially suitable for Immunity Testing acc. to IEC 61000-4-3 because of its good field uniformity.
- (0.6)0.7-9 (10.5) GHz
- Gain 10.3 dBi +/- 1.5 dBi
- Type N female
The Precision Omnidirectional Dipoles POD 16 and POD 618 are fully compliant to CISPR 16-1-4 for site validation above 1 GHz. The POD 16 and POD 618 are precision broadband dipole antennas with conically shaped radiation elements covered by an RF-transparent radome. This rugged construction enables an excellent dipole-like radiation pattern up to 18 GHz.
Precision Loop Antenna The PLA-R antenna is an active, battery-powered loop antenna for fully compliant radiated disturbance measurements. Due to the broad frequency range from 9 kHz to 30 MHz, it is suitable for all emission standards. A very low noise floor allows for compliance measurements with low limits. Furthermore, the passive operation mode ensures that strong emissions e.g. from wireless charging applications don't overload the preamplifier. With the integrated tripod, positioning is convenient and fast as the loop antenna needs to be oriented in x, y, and z orientation. Two integrated laser pointers support the alignment.
The PLA set consists of two active, battery powered loop antennas intended for site validation. With the broad frequency range from 9 kHz to 30 MHz it is suitable for Normalized Site Attenuation (NSA) measurements and Shielding Effectiveness (SE) measurements.
The coupling clamp CDN 2012 conforms exactly to the requirements of ISO 7637-3 and other standards, guaranteeing that tests are carried out in strict compliance with the standard. The CDN allows the fast nanosecond pulse bursts ( ISO 3a and 3b) to be injected in cable runs. Very high impedance signal lines are also to be found in vehicles on which the disruptive effects of ISO pulses 1 and 2 can also show up through capacitive coupling.
