Standards

Products

VBA2000P Series — 1 to 2 GHz Class-AB Pulse RF Power Amplifiers

  • Class-A architecture 
  • High reliability proven GaAs design
  • Wideband 1 GHz – 2 GHz 
  • Unconditional stability & extreme VSWR tolerance 
  • RTCA DO-160 Section 20 testing

LSProbe 2.0 Variant B, Laser Powered Field Probe, 9 kHz to 26.5 GHz, <1 V/m … >1,000 V/m

The LSProbe 2.0 Variant B Field Probe is a high-speed, high-accuracy, and high-dynamic range electric-field probe.

  • Its standard frequency range is 9 kHz – 26.5 GHz. (Variant B) 1,000 V/m
  • Best-in-class compensation of linearity, frequency, and temperature guarantees accurate measurements from less than 1 to at least 1,000 V/m.
  • A dynamic range of 100 dB is achieved for many frequencies, enabling Field measurements at more than 10,000 V/m.

SFExxG & SFGxxG Free Field Derivative E/H Probes

  •  Up to 10 GHz – Wideband pulsed field measurement
  •  High Accuracy – Captures fast transients
  •  Passive Operation – No power needed
  •  EMI Immune – Interference-free data
  •  Oscilloscope Ready – Direct coaxial output
  •  Rugged Design – Built for harsh environments

SGxxxxG Ground Plane Derivative E/H Probes

  •  Up to 10 GHz – Wideband pulsed field measurement
  •  High Accuracy – Captures fast transients
  •  Passive Operation – No power needed
  •  EMI Immune – Interference-free data
  •  Oscilloscope Ready – Direct coaxial output
  •  Rugged Design – Built for harsh environments

MF EASY, DC-400 kHz, MAGNETIC FIELD EXPOSURE ASSESSMENT SYSTEM

The MF EASY is a scalable and flexible multichannel measurement and assessment system for magnetic fields in the frequency range DC – 400 kHz. It is available with 5 or 10 (on request up to 15) fully isotropic measurement channels enabling simultaneous magnetic field measurements on 5 or 10 (15) measurement positions.

Different standard probe types (sizes and shapes) are available for the MF EASY. Customized probes are available on request. Iso-centrically arranged coil and Hall sensor enable a measurement frequency range from DC to 400 kHz and a measurement sensitivity suitable for assessing human exposure.

HFa-1-16-Ref, 16 Amp single phase Harmonics and Flicker w/ Impedance Reference

  • Full compliant system meeting the requirements 
  • IEC 61000-3-2 Harmoinc Emissions
  • IEC 61000-3-3 Flicker Emissons
  • USB controlled, Windows 10 compatible software included
  • 16 Amp, 120, and 230 Voltages, 50/60Hz

U-DC Single channel w/multichannel receiver 17Bit, 60V, 10Hz

U-DC

  • High-resolution (16 bit)
  • Measurement Display
  • +/-60V input; +/- 6V or +/-12V output (customizable)
  • Up to 40 samples / s (remote access, moving mean mode, programmable)
  • Multi-channel receiver with Display and remote data access via USB, GPIB,...

HFRA 5164, 10 kHz - 120 MHz Transmitting loop antenna

  • The circular transmitting loop antenna
  • 0.01 - 120 MHz
  • diam. 100 mm
  • turns 3
  • BNC Connectors 

ESD Test Table Kit

The ESD Test Table Kit is a simple inexpensive solution for your ESD testing. Complies to the requirements of IEC 61000-4-2 and can be used for additional standards. Comes with a Horizontal Coupling Plane (HCP), resistive cable to tie HCP to floor ground plane, bleeder wire for discharging ungrounded battery powered EUTs, 0.05mm insulator and an alternative low impedance ground for using the table for additional setups such as IEC 61000-4-6 requirements.

STLP 9129 - 70 MHz - 10 GHz Stacked Log. Periodic Antenna

The STLP 9129 was specially designed for wideband immunity tests. This unrivaled bandwidth was achieved by combining both well-proven antenna designs STLP 9128 D and the STLP 9149. The STLP 9129 does provide the optimum out of gain and field uniformity at the same time as well as both basic antennas do. Main Application: Generation of defined high field strength levels for radiated immunity testing acc. IEC 61000-4-3.

  • 70 MHz to 10 GHz
  • gain of 8.6 dBi, ripple of less than +/- 2.3 dB
  • Type N female or Type 7/16 female


Loading...