Products
The optoLAN 100/1000Base-T1-BCM89887 is a bidirectional optical transmission system for automotive Ethernet 1000Base-T1 and 100Base-T1 signals. Featuring Rosenberger HSD (Z-coded) connectors, optical transmission, and a shielded case, it ensures reliable, interference-free performance for EMI and EME testing, proven in automotive EMC labs. (picture to be updated)
- Technologically advanced, fast-switching, compact 19-inch power supplies
- High control dynamics in the 100...200 µs range – even at higher power levels
- Exceptional current accuracy of <0.02% FS, additional high-resolution current measurement range included as standard
- Full power regeneration and a high degree of efficiency, resulting in a significant reduction of energy consumption and heat dissipation, low acoustic noise
- Wide current-voltage range with an auto-ranging factor of 3
- Full digital CV, CC, CP, CR, and Ri-Sim control modes
The LSProbe 2.0 Variant B Field Probe is a high-speed, high-accuracy, and high-dynamic range electric-field probe.
- Its standard frequency range is 9 kHz – 26.5 GHz. (Variant B) 1,000 V/m
- Best-in-class compensation of linearity, frequency, and temperature guarantees accurate measurements from less than 1 to at least 1,000 V/m.
- A dynamic range of 100 dB is achieved for many frequencies, enabling Field measurements at more than 10,000 V/m.
- Vertikal Active Rod Antenna
- 9 kHz - 30 MHz
- BNC
- reduced noise floor
- with mounting nut for AM 9144 and rechargeable battery
- Meeting requirements of MIL-STD-461, CISPR 25, and others
- Up to 10 GHz – Wideband pulsed field measurement
- High Accuracy – Captures fast transients
- Passive Operation – No power needed
- EMI Immune – Interference-free data
- Oscilloscope Ready – Direct coaxial output
- Rugged Design – Built for harsh environments
- Up to 10 GHz – Wideband pulsed field measurement
- High Accuracy – Captures fast transients
- Passive Operation – No power needed
- EMI Immune – Interference-free data
- Oscilloscope Ready – Direct coaxial output
- Rugged Design – Built for harsh environments
- Full compliant system meeting the requirements
- IEC 61000-3-2 Harmoinc Emissions
- IEC 61000-3-3 Flicker Emissons
- USB controlled, Windows 10 compatible software included
- 16 Amp, 120, and 230 Voltages, 50/60Hz
U-DC
- High-resolution (16 bit)
- Measurement Display
- +/-60V input; +/- 6V or +/-12V output (customizable)
- Up to 40 samples / s (remote access, moving mean mode, programmable)
- Multi-channel receiver with Display and remote data access via USB, GPIB,...
- The circular transmitting loop antenna
- 0.01 - 120 MHz
- diam. 100 mm
- turns 3
- BNC Connectors
The ESD Test Table Kit is a simple inexpensive solution for your ESD testing. Complies to the requirements of IEC 61000-4-2 and can be used for additional standards. Comes with a Horizontal Coupling Plane (HCP), resistive cable to tie HCP to floor ground plane, bleeder wire for discharging ungrounded battery powered EUTs, 0.05mm insulator and an alternative low impedance ground for using the table for additional setups such as IEC 61000-4-6 requirements.
