Standards

Products

LSProbe 2.0 Variant B, Laser Powered Field Probe, 9 kHz to 26.5 GHz, <1 V/m … >1,000 V/m

The LSProbe 2.0 Variant B Field Probe is a high-speed, high-accuracy, and high-dynamic range electric-field probe.

  • Its standard frequency range is 9 kHz – 26.5 GHz. (Variant B) 1,000 V/m
  • Best-in-class compensation of linearity, frequency, and temperature guarantees accurate measurements from less than 1 to at least 1,000 V/m.
  • A dynamic range of 100 dB is achieved for many frequencies, enabling Field measurements at more than 10,000 V/m.

optoLAN 100/1000Base-T1-BCM89887 Optical Link for Automotive Ethernet

The optoLAN 100/1000Base-T1-BCM89887 is a bidirectional optical transmission system for automotive Ethernet 1000Base-T1 and 100Base-T1 signals. Featuring Rosenberger HSD (Z-coded) connectors, optical transmission, and a shielded case, it ensures reliable, interference-free performance for EMI and EME testing, proven in automotive EMC labs. (picture to be updated)

CABCISPR2515A, CISPR 25, 5uH, 15 A LISN

CABCISPR2515A

  • TEST STANDARD: CISPR 25
  • 5 μH // 50 Ω LISN / Artificial Network
  • Small Size 35 x 80 x 120mm

Helmholtz Coils Overview

 Helmholtz Coils Overview see below

SFExxG & SFGxxG Free Field Derivative E/H Probes

  •  Up to 10 GHz – Wideband pulsed field measurement
  •  High Accuracy – Captures fast transients
  •  Passive Operation – No power needed
  •  EMI Immune – Interference-free data
  •  Oscilloscope Ready – Direct coaxial output
  •  Rugged Design – Built for harsh environments

SGxxxxG Ground Plane Derivative E/H Probes

  •  Up to 10 GHz – Wideband pulsed field measurement
  •  High Accuracy – Captures fast transients
  •  Passive Operation – No power needed
  •  EMI Immune – Interference-free data
  •  Oscilloscope Ready – Direct coaxial output
  •  Rugged Design – Built for harsh environments

Cx 10000-xxx-xxx, 1000V, 100 - 600 amp 10mF HV Capacitor Cabinet

Capacitor Cx, stand-alone

  • ≥ 10 mF incl. active discharge
  • 100 - 600 A AC + DC RMS
    • 150 - 350 A AC RMS
  • 1,000 V DC
  • Screw terminal connectors M12 (M16 for 600A)
    • DC power supply
    • Ripple generator

CAB1356m Coupling Network for 13.56 MHz

Coupling Network for 13.56 MHz 

  • It matches 50 Ohm amplifier  
  • Use with CAB4-3910 loop antenna
  • Can work with other similar antennas
  • Type N f-n connectors attached directly to the loop 

U-DC Single channel w/multichannel receiver 17Bit, 60V, 10Hz

U-DC

  • High-resolution (16 bit)
  • Measurement Display
  • +/-60V input; +/- 6V or +/-12V output (customizable)
  • Up to 40 samples / s (remote access, moving mean mode, programmable)
  • Multi-channel receiver with Display and remote data access via USB, GPIB,...

HFRA 5164, 10 kHz - 120 MHz Transmitting loop antenna

  • The circular transmitting loop antenna
  • 0.01 - 120 MHz
  • diam. 100 mm
  • turns 3
  • BNC Connectors 


Loading...