Products
The TBCG2 is a passive, step recovery diode based comb generator/frequency multiplier. It is optimized for moderate drive power and spectrum flatness in the frequency range 1 MHz to 2.5GHz. The recommended drive power is +10 dBm to +20 dBm The frequency range for the drive signal is 1 MHz to 350MHz
The TBAS3 RF 10W attenuator set consists of a 3dB, 6dB, 10dB and 20dB attenuator in a beech wood box.
The TBAS1 RF 2W attenuator set
The TBAS2 RF SMA attenuator/termination set consists of a 3dB, 6dB, 10dB, 15dB, 20dB and 30dB SMA attenuators in a beechwood box. Furthermore, it contains two pieces SMA 50 Ohm terminations.
The TBCG3-RN2 comb generator is primarily intended for testing radiated emission setups. It is a useful tool for validating the proper operation of the antenna and pre-amplifier, as well as the accurate set-up and configuration of the spectrum analyzer.
- 5 kHz-2 GHz,
- switchable 5, 10, 25, 50, 100 MHz,
- external: 5 kHz-200 MHz,
- 6xNiMH, AA, Charger,
- 2 monopole antennas
- Isotropic E-Field Antenna for the handheld spectrum analyzer
- Frequency range: (10) 30 MHz - 3 (3.3) GHz
- Light weight low attenuation radom
- Outer diameter approx. 150 mm
E-field, 9 kHz - 300 MHz, probe for handheld spectrum analyzer of all main manufacturers.
Usable with the following devices:
- Rohde und Schwarz FSH-Serie
- Agilent Fieldfox
- Anritsu Sitemaster, LMR-Master, Spectrum Master
- Aeroflex 9100 Handheld Spectrum Analyzer Series
- and many more...
H-field, 9 kHz - 300 MHz, probe for handheld spectrum analyzer of all main manufacturers.
Usable with the following devices:
- Rohde und Schwarz FSH-Serie
- Agilent Fieldfox
- Anritsu Sitemaster, LMR-Master, Spectrum Master
- Aeroflex 9100 Handheld Spectrum Analyzer Series
- and many more...
- Helical antenna
- 750 - 1050 MHz
- left-hand circular polarization (LHCP)
- gain: 11 dBic
- 22 mm tube
- Helical antenna
- 750 - 1050 MHz
- Right-hand circular polarization (RHCP)
- gain: 11 dBic
- 22 mm tube
