Standards

The optoSPI-HS system can be used for the bidirectional optical transmission of SPI signals with transmission rates of up to 1Mbit/s. It consists of two battery supplied transceivers connected to each other with an optical fiber. With the optical transmission of the shielded case and the external filter, the system is well equipped for EMI and EME tests.

The optoK system can be used for the optical transmission of K-Line signals with transmission rates of more than 30kbit/s at supply voltages of up to 24V. It consists of two identical battery supplied transceivers connected to each other with an optical fiber. With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.

• Ultra-Wideband Performance – Covers 200 Hz – 10 GHz
• Precise 180° Phase Shift – Ensures accurate signal inversion
• Passive Operation – No power required, high reliability
• High Dynamic Range – Minimal distortion, superior fidelity
• EMI Shielded – Operates in high-field environments (>500 kV/m)
• Compact & Durable – SMA connectors, rugged design

• Broadband Amplification – Covers 80 Hz – 3 GHz
• High Gain Options – 20 dB or 40 dB for signal boosting
• Superior EMI Shielding – Operates in fields >500 kV/m
• Battery-Powered – Up to 27-hour autonomy
• Low Noise Performance – Ensures clean signal amplification
• Rugged & Compact – SMA connectors, lightweight design

The optoSENT system was developed for the transmission of asynchronous SENT signals (Single Edge Nibble Transfer) aThis system is used for the optical transmission of PSI5-signals and allows the transmission in both directions with a sampling rate of 50 MS/s. It consists of a transceiver, supplied by batteries, for the connection of a sensor, a simplex-62,5/125µm-multimode optical cable, and a receiver with internal batteries as well.nd exists in two different versions.

• Seamless Impedance Matching – Converts 1 MΩ to 50 Ω for accurate measurements
• Broadband Performance – Covers DC to 650 MHz
• Low-Noise Operation – Shielded design for interference-free signals
• Battery-Powered – 40+ hours autonomy, quick
• Versatile Connectivity – BNC input & SMA output for easy integration

• Automated Oscilloscope Control – Seamless data collection & waveform adjustments
• Advanced Signal Compensation – Real-time correction for accurate measurements
• Multi-Channel Support – Controls multiple oscilloscopes simultaneously
• Time & Frequency Domain Analysis – Deep signal insight for precise testing
• User-Friendly Interface – Intuitive setup, measurement logging & export
• Lifetime License – One-time purchase, no recurring fees

• Ultra-Wideband – Covers up to 10 GHz
• High Accuracy – Superior phase & amplitude balance
• EMI Shielded – Ensures clean signal transmission
• Low Loss – Maintains signal integrity
• Passive Design – No power required, bidirectional flow
• Compact & Durable – SMA connectors for easy integration

The broadband horn antenna BBHA 9120 C is a linear polarized double ridged horn antenna.

• 2 GHz to 18 (20) GHz
• SMA - female

The STLP 9128 E special is nearly identical like the STLP 9120 E but with folded longest elements and smaller structure angle.

• 80 - 1700(2700) MHz
• Type N (female) or Type 7/16 (female)